A simple little protection board for low current (3A or less draw) systems using 2 series lithium cells. The type / size of cell is not important but the chemistry, must be lithium. The Negative ( -) end of the first cell is connected to the PCB terminal marked B- The connections between the (+) positive end of the first cell and the (-) Negative end of the second cell is connected to the PCB terminal marked BM (battery middle?) The (+) Positive end of the second cell is connected to the PCB terminal marked B+ The connection to the load / charge is made to the terminals marked P+ (7.5V nominal) and P- (GND Negative) Operation is simple. If either of the 2 series cells exceeds the upper voltage limit or drops below the lower voltage limit, the load / charge connection disconnects. The load / charge connection reconnects when the voltages are normal again. This may be the basis of a simple charge limiting circuit and over discharge protection circuit. The board is well made and works as it should. I hope this clears up some of the questions raised.

A simple little protection board for low current (3A or less draw) systems using 2 series lithium cells. The type / size of cell is not important but the chemistry, must be lithium. The Negative ( -) end of the first cell is connected to the PCB terminal marked B- The connections between the (+) positive end of the first cell and the (-) Negative end of the second cell is connected to the PCB terminal marked BM (battery middle?) The (+) Positive end of the second cell is connected to the PCB terminal marked B+ The connection to the load / charge is made to the terminals marked P+ (7.5V nominal) and P- (GND Negative) Operation is simple. If either of the 2 series cells exceeds the upper voltage limit or drops below the lower voltage limit, the load / charge connection disconnects. The load / charge connection reconnects when the voltages are normal again. This may be the basis of a simple charge limiting circuit and over discharge protection circuit. The board is well made and works as it should. I hope this clears up some of the questions raised.

A simple little protection board for low current (3A or less draw) systems using 2 series lithium cells. The type / size of cell is not important but the chemistry, must be lithium. The Negative ( -) end of the first cell is connected to the PCB terminal marked B- The connections between the (+) positive end of the first cell and the (-) Negative end of the second cell is connected to the PCB terminal marked BM (battery middle?) The (+) Positive end of the second cell is connected to the PCB terminal marked B+ The connection to the load / charge is made to the terminals marked P+ (7.5V nominal) and P- (GND Negative) Operation is simple. If either of the 2 series cells exceeds the upper voltage limit or drops below the lower voltage limit, the load / charge connection disconnects. The load / charge connection reconnects when the voltages are normal again. This may be the basis of a simple charge limiting circuit and over discharge protection circuit. The board is well made and works as it should. I hope this clears up some of the questions raised.

Nabíjací a ochranný obvod pre 2ks spojené Li ion batérie 18650 2S 7,4 V. Balenie po 5 ks.

Nabíjací a ochranný obvod pre 2ks spojené Li ion batérie 18650 2S 7,4 V. Balenie po 5 ks.

Nabíjací a ochranný obvod pre 2ks spojené Li ion batérie 18650 2S 7,4 V. Balenie po 5 ks.

very good recommend 🤝🏿

muito bom recomendo 🤝🏿

very good recommend 🤝🏿

bought to protect external batteries them ion for external module r9m. The pads to be soldered are delicate. At 385° they detach and move.

comprato per proteggere le batterie esterne li ion per il modulo esterno r9m. i pad da saldare sono delicati. A 385° si staccano e si spostano.

bought to protect external batteries them ion for external module r9m. The pads to be soldered are delicate. At 385° they detach and move.

Fast delivery. Works fine

Fast delivery. Works fine

Fast delivery. Works fine

good quality, it's working, very small dimensions

good quality, it's working, very small dimensions

good quality, it's working, very small dimensions

arrived very fast yet I do not try it but it looks good when I try it I will comment more

llegó muy rápido aún no lo pruebo pero se ve bien cundo lo pruebe comentaré más

arrived very fast yet I do not try it but it looks good when I try it I will comment more

nice and small

nice and small

nice and small

Works perfectly. Had no problem what so ever to replace to old defective BMS with this one.

Works perfectly. Had no problem what so ever to replace to old defective BMS with this one.

Works perfectly. Had no problem what so ever to replace to old defective BMS with this one.

Very small but good and super fast shipping

Sehr klein aber gut und super schnell Versand

Very small but good and super fast shipping