Customer Reviews

4.67 out of 5
See all 9 reviews
Write a Review
  • All Reviews (9)
  • Image (1)
  • Video (0)
  • All Star
    • All Star(9)
    • 5 Star(7)
    • 4 Star(1)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 27/11/2020

    These little units seem to work fine. However be aware that they produce no output untli the input is about 18v. That means that if your solar panel is not producing over 18v there will be no battery charging going on at all. Above 18v they produce a steady 13.6v. I don't know how much current they can supply under best conditions. My solar panel only provided 18v or more under very bright conditions so I put a Boost module between the solar panel and the MPPT unit. That boosted the voltage up to about 24 v even with quite low solar panel output so I got some charging under most conditions.

    Comments (1)
    Show Original
  • 16/11/2020

    under test

    Comments (1)
    Show Original
  • 09/10/2020

    Work well but does not have battery discharge protection. I exploded one already as I was setting it up the input wire touch and the mosfet and resistor went up in smoke. Be careful when installing I highly suggest a protection diode at the output.

    Comments (2)
    Show Original
  • 08/07/2021

    the products no longer arrive as at first they were fast, I tried them every one of them I will use them in my projects

    Show Original
  • 03/12/2020

    great product

    Show Original
  • 02/11/2020

    very goot

    Show Original
  • 02/10/2020

    Products arrived packaged well and in good condition. Very fast delivery this time, thank you.

    Show Original
  • 10/01/2022

    Received the MPPT charge controller. Thank you. 1. The controller works with input voltage from panel is more than 18V. But it does not work if less than 18V. 2. So during morning time & evening time, we can't use it.

    Show Original
  • 25/11/2020

    2 of 3 boards that have arrived showed residue of either oxidation or solder flux, but after all worked

    Comments (1)
    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$9.19
    • US$62.99
    • US$44.25
    • US$5.24
    • US$9.34
    • US$10.49
    • US$9.44
    • US$4.19
    • US$8.39
    • US$4.19
    • US$3.77
    • US$4.99
    • US$6.80
    • US$10.49
    • US$1.20
    • US$4.19
    • US$22.04
    • US$103.99