Customer Reviews

4.92 out of 5
See all 177 reviews
Write a Review
  • All Reviews (177)
  • Image (29)
  • Video (2)
  • All Star
    • All Star(177)
    • 5 Star(171)
    • 4 Star(2)
    • 3 Star(1)
    • 2 Star(1)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 15/02/2018

    These are 1:1 the Airbot Wraith v2's under different branding however same quality. At first sight you can see all those caps, the filtering is amazing. The troughhole soldering pads for PWM, PWM-GND and BLHeli_32 TX make it easier to solder without creating shorts however you should still feel comfortable soldering, they're pretty small after all. Flashed with newest BLHeli_32 and setup to run at 48 kHz PWM frequency. Video signal is crystal clear. Motors run smooth. (I did remove the 1000 uF low ESR cap between Bat+ and Bat- after the Install) The cables that came with it are high quality silicone wires however pre-tinned with lead-free-solder. Picture of ESCs on quad for size reference.

    Comments (2)
    Show Original
  • 03/10/2019

    Tekko ESC Ottimo in accoppiata con il Flight Controll della HOLIBRO. consigliata questa concezione perché ogni esc è indipendente e per iniziare va molto bene (nell'eventualità si dovesse bruciare un solo ESC basterà cambiarlo senza sostituire gli altri funzionanti). la scatola è ben fatto e completa di ogni accessorio per il montaggio (saldatura...)

    Comments
    Show Original
  • 13/09/2018

    - not generating any noise with my emax 2205 motors - makes the motors ruin very smooth - easy to solder - a little big (be carefull when selecting a frame and ESC protectors)

    Comments
    Show Original
  • 11/10/2018

    Just completed a new build with these ESC without adding capacitor. There is no noise running at a 4S lipo with full throttle. No static in the video signal at all. The size of the ESC is a bit bigger than I thought. It's wider than the Armattan Roosters arm as you see in the picture. Otherwise, these ESC is perfect. The LED looks good and it's on both sides of the ESC as well.

    Comments
    Show Original
  • 05/10/2019

    Посылка пришла в срок. На вид все отлично. В комплекте есть все провода, конденсаторы и термоусадка

    Comments
    Show Original
  • 25/06/2018

    Dear Banggood. I was connecting the drone with usb on Butterflight and also with the 4 S lipo. I did this for a few times and it was fine. But now suddenly the ESC just Lit itself on fire. why is that??

    Comments (2)
    Show Original
  • 02/09/2018

    Using these on my latest build with Dshot 1200 and Esc telemetry. Working great. I have them covered with tape and drawing 130 amps but still max temperature goes to only 68 degrees. Very satisfied.

    Comments
    Show Original
  • 05/07/2018

    produit visuellement de qualité pas encore essayé mais Haye de voir si je ressens une diffenrence en dshot1200 !

    Comments
    Show Original
  • 25/12/2018

    These are great ESC only the capacitors on the top are quite fragile to prop strikes. A simple 3d printed ESC protector solves this problem and other ESC on the arms have the exact same problem. I use these protectors to protect my ESC: https://www.thingiverse.com/thing:2903805

    Comments
    Show Original
  • 25/10/2018

    Not tested yet but soldering quality seems TOP.No manual, booklet or instructions. Just a qrcode with Holybro product page But it comes in a sturdy and cool box with quality silicon wires.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • £27.40
    • £9.01
    • £8.50
    • £6.55
    • £33.16
    • £16.21
    • £10.66
    • £11.05
    • £17.68
    • £8.50
    • £2.97
    • £25.31
    • £8.10
    • £24.60
    • £10.31
    • £16.21
    • £50.84
    • £97.49