Customer Reviews

4.83 out of 5
See all 361 reviews
Write a Review
  • All Reviews (361)
  • Image (36)
  • Video (0)
  • All Star
    • All Star(361)
    • 5 Star(317)
    • 4 Star(28)
    • 3 Star(14)
    • 2 Star(1)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 17/12/2017

    Good tool, handy and similar to makita MT37xx (but 4x cheaper). WARNING: "Collet Diameter: 6mm(1/4")" - this is not true! collet is for 1/4" = 6.35mm shanks, and cannot hold 6.00mm shanks or drills (is too loose and cannot be screwed tighter.). I have original makita too, with collet for 6mm shanks (whitch cannot handle 6.35mm shanks) - so I can borrow this part, but be aware if you have plan to use 6.00mm "EU" tools ...

    Comments
    Show Original
  • 09/01/2018

    Фрезер компактный, достаточно легкий и тихий. Не бьет. Но на этом все плюсы и заканчиваются. Минусов больше. Очень короткий кабель - 60см. Цанга на 6.35мм! Не верьте наклейке! Я это подозревал и сразу купил набор фрез под этот диаметр. Цанга необычная (скорее не цанга, а разрезанное коническое кольцо). Подобрать аналог на 6мм будет сложно. Самая большая проблема - инструмент жутко греется в районе подшипника около цанги. Через 2 минуты уже градусов 50-60. Через пластиковыьй кожух не так сильно заметно, но ощутимо. Вокруг отверстия выхода вала из корпуса был сильный облой литья. Я решил, что греется из-за трения об него. Разобрал фрезер, удалил дефекты, дополнительно смазал подшипники, но это не помогло. На длительную работу этот аппарат не рассчитан. Только мелкие и непродолжительные работы. Замерил скорость врашения шпинделя - 25000. Ну никак не заявленные 30000, но держит стабильно и не силь падают при нагрузке. Плавного пуска нет. В принципе аппарат на свою цену.

    Comments (1)
    Show Original
  • 11/12/2017

    Indeed the collar is for 6.35mm bits. With a thin 1.5mm file you can enlarge the collar gap, so the nut closes more, up to 6.0 mm.

    Comments (4)
    Show Original
  • 09/02/2018

    i was very satisfied until i tried the bit into the col-let. see photo,s . the col-let seems to be a little short and wont close onto the shaft of the bit. please advise .ASAP. col-let wont tighten. regards Joseph Bulman.

    Comments (2)
    Show Original
  • 16/11/2017

    The trimmer is a nice and powerfull tool with low noise. It realy worth its money. BUT as you can see in the picture and in your description it sould have a collet for 6mm bits. It has only one for 6.35mm with can't keep 6mm bits. As you can see in my older orders, all of my bits are 6mm, so this tool is totally useless for me. Sent me a collet for 6mm bits. And those two adapters you send...... are suitable for a small radio, not for this tool. I wait for your solution.

    Comments (3)
    Show Original
  • 23/02/2019

    ottimo ruter trim di buona qualità utilizzato più voltr di comporta molto bene, attenzione all' ottima potenza di fresatura.ottimo anche il prezzo+++++++++++++++++++++

    Comments
    Show Original
  • 30/03/2019

    la maquina viene con un adaptador que no es europeo,mal envalada

    Comments (1)
    Show Original
  • 18/02/2018

    good fast delivery but not the item i order is a 110V should be 220V i can't use this at all

    Comments
    Show Original
  • 04/01/2018

    Received a shipment, thank you. The package was unfortunately sent in a plain bag that was torn apart and not in the protective padded bag, so the package was badly damaged, although the cutter was not damaged, but the individual screws were missing and the attached EU adapter is impossible to use because it does not fit on the cable.

    Comments
    Show Original
  • 28/12/2017

    this is a good quality foe money product. the power cable is in au conector and the power adaptor included is from us to eu that is not copatible so i change all the power cord. it is not noisy and looks powerful. The guide attachment came bent probably from packaging but it's nothing can't be fixed folowing a video with the power cable change procedure https://youtu.be/en03i-O-ZIw

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go
    recommendation for you
    • US$55.99
    • US$39.99
    • US$25.99
    • US$123.99
    • US$69.99
    • US$185.99
    • US$36.99
    • US$69.99
    • US$65.99
    • US$13.99
    • US$59.99
    • US$47.99
    • US$40.99
    • US$75.99
    • US$68.99
    • US$46.99
    • US$139.99
    • US$49.99