Customer Reviews

4.87 out of 5
See all 1052 reviews
Write a Review
  • All Reviews (1052)
  • Image (80)
  • Video (1)
  • All Star
    • All Star(1052)
    • 5 Star(967)
    • 4 Star(56)
    • 3 Star(12)
    • 2 Star(9)
    • 1 Star(8)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 09/01/2022

    I have purchased two of these clamps and received them before the estimated delivery date. The packaging is substantial and the clamps arrived undamaged. The clamps are well made and work as expected. They are a new twist on an old idea, the Holdfast which woodworkers have been using for a very long time, see photo. When using the clamp, to get full clamping pressure the clamp must be pushed down hard on the work piece with the cam lever in the reset position. If this is not done the cam has to take up any gap before exerting pressure on the work piece. When the cam exerts pressure on the work piece it causes the knurled shaft in the dog hole to press against the sides of the dog hole. This pressure is only at the top and bottom of the dog hole as the cam tries to rotate the clamp within the dog hole. The knurled shaft does not need to be knurled all the way round as it only bears on the dog hole where it is in line with the clamp arm. If the knurling was only where needed it would make fitting the clamp in the dog hole easier. If the clamp will damage the dog holes over extended use, only time will tell.

    Comments (1)
    Show Original
  • 02/12/2021

    This clamps are very well made and nice to handle. Proud owner of this quality product. Thanks Dennis from Hooked On Wood for his recommendation.

    Show Original
  • 29/10/2021

    Package arrived in very good condition. The clamp is well protected in the foam and carton box. The solid piece of aluminium gives a good first impression. The lever which is acting as a cam for different pressure levels has a bit of friction with the pressure area. I put some PTFE and is ok. The cam is running perfectly parallel to the pressure plate which means pressure is well distributed. One of the 2 bolts is a bit proud of the pressure plate and it will mar the workpiece if in contact. It needs filing. This means taking the other 4 bolts off connecting the steel spring to the main body. The cross hatched pillar is sligtly bigger than 20mm (just shy of 20.1mm) as can be seen in the vernier reading. I guess it will need a bit of light sanding down.

    Comments (4)
    Show Original
  • 22/11/2021

    Well finished product. Robust and soft to use. Hold it tight. Very well conditioned.

    Show Original
  • 19/04/2022

    Product came in well packaged in foam and well constructed with knurled stainless steel shaft (3-3/8” L) and anodized aluminum clamp body. Well suited for MFT type table with 19mm (3/4”) dog holes.

    Show Original
  • 09/12/2022

    The packaging is excellent, has foam protection inside the box. No user manual is included. The MFT clamp is an elegant woodworking bench tool made of high quality CNC material. Feels sturdy and durable thanks to the anodized matte finish. Has low, middle and high gear to apply different clamping force according to your needs. It weighs only 233.2g / 8.22oz. I measured an outer and inner diameter of 19.67mm / 0.77 in and 13.65mm / 0.54 in, respectively. The outer diameter measurement meets the specification value (20mm). Mine came with some minor scratches on the uncoated bottom part which don't affect the clamp's perfomance. All my measurements met the manufacturer's size specifications.

    Show Original
  • 21/11/2021

    Excellent dog clamps. Had a strong clamping power, easy to use and apply. Excellent quality.

    Show Original
  • 15/10/2021

    ***** Alles bestens *****

    Show Original
  • 23/06/2023

    all is ok. box was lightly damaged but everything inside is clear. thanks

    Show Original
  • 27/03/2022

    perfect. simple to use and with a very solid grip. better to take 2

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$37.99
    • US$18.99
    • US$16.99
    • US$24.99
    • US$36.99
    • US$4.99
    • US$5.99
    • US$45.99
    • US$14.99
    • US$3.99