Banggood

This is brilliant - works with RPI Zero and ZeroW The only possible improvement would be a reversible USB plug instead. I took extra time and I made a special enclosure - you can read about it on my page https://notenoughtech.com/raspberry-pi/usberry-pi-usb-raspberry-pi-zero-on-the-go/

Installed quickly and easily. need to make 8 solder joints, if your Pi zero is in acse you will need to modify or get a new one, The extra two circles on the pc board tab need to be carefully broken off to be used as spacers.

Very useful little adapter.

useful adapter

pretty handy for pi0w

Very good. Arrived in an anti-static bag. I though one of the nuts was missing but it had hidden itself in the USB socket, and was easily retrieved with a hooked cable tie. Make sure you (carefully) break off the spacer washers from the board before you try to fix it to the pi.

time/space saver

OK , Not tested yet, seems great

Good

Great