My first bluewoop. He had been looking at it for a long time, but he did not dare, thinking that something was going to be sluggish and unwieldy. But after the first tests to fly, I believe that the device is worthy of attention. I got a version with motors 1506 3000KV. I've tried putting a GoPro undressed, and yes, he can handle it. Of course with a naked GoPro, it would be a lot easier, but I don't have one yet. Batteries use 4s 850mAh. The quad from the box is stitched and customized, it is important because accidentally switched profiles settings and could not understand why so bad flying, but when I went to the settings saw that the profiles are different from those that default. Picked the right profile and oh miracle management changed for the better. So I highly recommend to save the settings dump before updating the firmware, if you do not know how to configure yourself. Well, or in case of replacement flight controller save settings, flash version BF with which quad came and fill there plant settings. Yes! By the way, the site betafpv has a dump of settings, so if suddenly forgot to do a dump, you can find the dump on the site and upload it to the flight controller.

Мой первый синевуп. Давно присматривался, но не решался, думал, что будет что-то вялое и неповоротливое. Но после первых проб полетать, считаю, что аппарат достоин внимания. Мне пришла версия с моторами 1506 3000KV. Пробовал ставить не раздетую GoPro, и да, он с ней справляется. Конечно с раздетой GoPro, было бы намного легче, но у меня пока её нет. Аккумы использую 4s 850mAh. Квад из коробки прошит и настроен, это важно, т.к. случайно переключил профили настроек и не мог понять почему так плохо летает, но, когда полез в настройки увидел, что профили отличаются от тех, которые по умолчанию. Выбрал нужный профиль и о чудо управление изменилось в лучшую сторону. Так что очень рекомендую перед обновлением прошивки сохранять дамп настроек, если сами не умеете настраивать. Ну или на случай замены полетного контроллера сохранить настройки, прошивать версию BF с которой квад пришел и заливать туда настройки завода. Да! Кстати, на сайте betafpv есть дамп настроек, так что, если вдруг забыли сделать дамп, можно найти дамп на сайте и загрузить его в полетный контроллер.

My first bluewoop. He had been looking at it for a long time, but he did not dare, thinking that something was going to be sluggish and unwieldy. But after the first tests to fly, I believe that the device is worthy of attention. I got a version with motors 1506 3000KV. I've tried putting a GoPro undressed, and yes, he can handle it. Of course with a naked GoPro, it would be a lot easier, but I don't have one yet. Batteries use 4s 850mAh. The quad from the box is stitched and customized, it is important because accidentally switched profiles settings and could not understand why so bad flying, but when I went to the settings saw that the profiles are different from those that default. Picked the right profile and oh miracle management changed for the better. So I highly recommend to save the settings dump before updating the firmware, if you do not know how to configure yourself. Well, or in case of replacement flight controller save settings, flash version BF with which quad came and fill there plant settings. Yes! By the way, the site betafpv has a dump of settings, so if suddenly forgot to do a dump, you can find the dump on the site and upload it to the flight controller.

All as described. Only connected to the PC, waiting for RX. The box is a little bruised because it's only wrapped in film. Also in the box spare set of D76 prop, microUSB adapter (corner), frame for camera 19*19, hexagon key, adapter for naked GoPro.

Все как описано. Подключал только к ПК, жду RX. Немного помята коробка, т.к. упакован только в пленку. Также в коробке запасной комплект пропов D76, микроUSB переходник(угловой), рамка под камеру 19*19, шестигранный ключик, переходник для naked GoPro.

All as described. Only connected to the PC, waiting for RX. The box is a little bruised because it's only wrapped in film. Also in the box spare set of D76 prop, microUSB adapter (corner), frame for camera 19*19, hexagon key, adapter for naked GoPro.

A cinewhoop that flies 10, resistant to shocks (I have already given enough) although the camera is very unprotected and breaks easily. He's here in two weeks, a 10 for Bangood.

Un cinewhoop que vuela de 10, resistente a los golpes ( ya le he dado bastantes) aunque la cámara está muy desprotegida y se rompe fácilmente. Llegó en dos semanas, un 10 para Bangood.

A cinewhoop that flies 10, resistant to shocks (I have already given enough) although the camera is very unprotected and breaks easily. He's here in two weeks, a 10 for Bangood.

Fast delivery. complete set. will test tomorrow.

Fast delivery. complete set. will test tomorrow.

Fast delivery. complete set. will test tomorrow.

I'm enjoying the PAVO. He suffers a little to carry a full GoPro, but he takes. Without the camera, it's a very nimble drone!

estou gostando do PAVO. Ele sofre um pouco para carregar uma GoPro full, mas leva. sem a câmera é um drone bem ágil!

I'm enjoying the PAVO. He suffers a little to carry a full GoPro, but he takes. Without the camera, it's a very nimble drone!

I can't wait to try it

non vedo l'ora di provarlo

I can't wait to try it

2 negative aspects.Taking apart the quad is challenging because it involves unscrewing several types of screws. Custom USB connector is required to connect to the FC which is a drawback.all else is ok

2 negative aspects.Taking apart the quad is challenging because it involves unscrewing several types of screws. Custom USB connector is required to connect to the FC which is a drawback.all else is ok

2 negative aspects.Taking apart the quad is challenging because it involves unscrewing several types of screws. Custom USB connector is required to connect to the FC which is a drawback.all else is ok

To be clogged on Opentx (TX16s) used "FrSky X" "D16" ('RF freq. fine tine '0')

Чтобы забиндится на Opentx (TX16s) использовал "FrSky X" "D16" ('RF freq. fine tine' '0')

To be clogged on Opentx (TX16s) used "FrSky X" "D16" ('RF freq. fine tine '0')

I love this thing... It was a nice upgrade to my betafpv beta95x v3... I have the SMO 4k cam mounted on top. This is a little larger and flies a little better than the beta95x. I normally run with a 4s 850mAh battery...

I love this thing... It was a nice upgrade to my betafpv beta95x v3... I have the SMO 4k cam mounted on top. This is a little larger and flies a little better than the beta95x. I normally run with a 4s 850mAh battery...

I love this thing... It was a nice upgrade to my betafpv beta95x v3... I have the SMO 4k cam mounted on top. This is a little larger and flies a little better than the beta95x. I normally run with a 4s 850mAh battery...

Super !!

Super !!

Super !!