Customer Reviews

4.97 out of 5
Write a Review
  • All Reviews (63)
  • Image (9)
  • Video (0)
  • All Star
    • All Star(63)
    • 5 Star(61)
    • 4 Star(2)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • 2020-09-06 17:11:16

    its very spacious and really keeps the heat in. that's my Endor 5 Plus in there and there's plenty of room in it to work around. would recommend but be advised if you're printer is sealed in heat the fan is pumping heat right back in to where its trying to cool. this resulted in my nozzle clogging up from material melting before it made it out. this plugged the machine and then caused the filliment to break. leaving me the slinky when I came back. great dust cover 👌 and leave the flap open it still

    Comments
  • pgielen
    NL
    2020-09-19 11:10:27

    This is a great enclosure for my Ender-3. It's huge for this machine, but it leaves plenty of room for your Octopi, lights etc. Just make sure that you have a table thats big enough for this enclosure, at least 75x75cm (I bought a second hand IKEA Melltorp table for it).

    Comments
  • mcmaho
    FR
    2020-06-16 11:14:17

    La fermeture éclair est décousue ou plutôt elle n'est pas cousue à un endroit , donc pas hermétique.

    Comments (1)
  • xsehlx
    DE
    2020-10-14 08:13:59

    sehr gute Qualität und Super praktisch

    Comments
  • Philipp
    DE
    2020-05-01 06:53:01

    Perfect, very satisfied with this enclosure! It fits my CR-10 + Control box very well. :-)

    Comments
  • 2020-08-05 03:08:56

    Parfait ! qualité extra !! je suis comblé !

    Comments
  • 2020-07-16 05:51:55

    Boitier original Creality, grand modèle, aucun défaut. Livraison en ordre.

    Comments
  • 2020-10-07 11:01:55

    Muy bien. Gran material y bien rematada.Envío super rápido.Eso sí, es gigante.

    Comments
  • ponk109
    ES
    2020-04-21 16:36:08

    Good quality of product. Alfawise U20 fits properly.

    Comments
  • Adam
    AU
    2020-09-23 11:28:12

    Really big insulated enclosure, easy to assemble and seems quite sturdy. Not quite high enough to accomodate a roll of filament on top of the SWX1 but room enough to relocate the filament next to the printer. Great starting point for making a PETG / ABS printing system with the addition of a VOC / Activated carbon filtration system.

    Comments
Show:

    Go to page

    Go

    You might be interested in

    recommendation for you
    • £13.97
    • £7.00
    • £5.44
    • £12.65
    • £1.07
    • £7.43
    • £8.09
    • £29.52
    • £10.00
    • £29.57
    • £5.71
    • £1.87
    • £5.71
    • £3.73
    • £28.01
    • £2.82
    • £7.77
    • £3.72