Customer Reviews

4.94 out of 5
Write a Review
  • All Reviews (1752)
  • Image (375)
  • Video (1)
  • All Star
    • All Star(1752)
    • 5 Star(1655)
    • 4 Star(90)
    • 3 Star(7)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 24/09/2020

    This is my first 3D printer. It comes very well packed. Instructions are clear and it's quite easy to assemble, eventually you will find tons of video of assembly, plus there is a big community around this printer, with advice and improvements. If I can give some advice : - The tools are provided, but if you are well equiped, use yours, always work with good tools. - Torque in a criss-cross pattern - Do not over torque - All axis should move smoothly, without play nor hard spot. - If you get hard spot or excessive play, check the belt tensioner and the excentric over the bearings - Bed leveling is way easier with a set of feeler gauges, I used 0.10 to 0.15mm I really appreciate that 60g of PLA was provided to make some trials. Easy to operate, I found a calibration model on thingiverse and printed it. I was very impressed by the quality and precision for a first print. Noise comes mostly from the hotend's fan and it is tolerable. To sum up, I highly recommend this printer.

    Comments (2)
    Show Original
  • 28/12/2020

    The product is excellent, in my opinion best buy, has an impressive print quality, the screen is user-friendly, in fact even reading the instructions was intuitive, while for the assembly I had some problems: the end of the Z axis I had put it too low, as a result I could not level the printing plate well as it collided against the stepper-motor behind, so after an hour I realized the problem, the second problem I found was that the bearings in some parts (hotend, printing plate) were too loose or too tight, I being a beginner did not know how to fix it (the print plane wobbled), as a result I turned to inthernet, for the rest apart these inconveniences I found it very well, also because the Nozzle heats up quickly, the plate a little less, the machine also has a convenient tool drawer, and knobs to tension the straps more easily, I recommend it as a 3D printer whether you are a beginner or an expert, but if you see that the top wobbles tighten it with the supplied key.

    Comments (1)
    Show Original
  • 02/08/2020

    The printer has a good quality, the frame is very stable and firm just like the Ender 3 Pro, easy to level the bed, super practical the belt tensioners, the 32bit board still learning to set up, As the printer is very new it still has its bugs in the firmware that still have to be fixed, but in the end the experience with this printer is very good.

    Comments (4)
    Show Original
  • 30/07/2020

    This is a great 3D printer and it is much approved of its older versions. It is well working and the features are great. Delivery was super fast only 9 days from China to Saudi Arabia without any extra charges. This printer is recommended if you're doing this as a hobby at home. The printer is very excellent and budget friendly and is more up-to-date than its previous versions. Delivered within 9 days from China to Saudi Arabia without any surcharge or tax. I recommend this printer to those who are amateurs in the field. It's home-friendly

    Comments (1)
    Show Original
  • 23/02/2021

    This is my first 3D printed and i can't be more happier! It took me 1 hour to assemble and adjust everything. The machine works perfect. For everyone who wants to buy a 3D printer: Go for it, you can't do nothing wrong. There are hundrets of videos and Tutorials in youtube für this Special printer.

    Comments (1)
    Show Original
  • 25/12/2020

    Excelent packaging. Very nice presentation and quality/price ratio. Does work already out of the box. My first 3D printer, satisfied with product, have probably over 50+ hours of printing time in first 2 weeks. Would recomend to buy, just be patient with bed leveling and clean bed for better adhesion.

    Comments (1)
    Show Original
  • VIP4

    Excellent 3d printer. Print quality is excellent, even at 0.2 res, using PLA. It is a pleasure to put together, thanks to the very good instruction manual. I love the colour LCD screen. Makes it very user friendly. Big upgrade compared to the ender 3 pro. Love this printer. Would recommend it to anyone.

    Comments (1)
    Show Original
  • 20/05/2021

    Very impressed. Easy to assemble (I found YouTube videos more helpful than the included manual) and I got rather good prints right from the start (again after following bed leveling advice from YouTube tutorials), using default settings for an Ender 3 in Cura on a Mac. Still have a lot to learn but I'm very pleased with the quality out of the box as a first time 3D printer user.

    Show Original
  • 11/04/2021

    Le istruzioni presenti nella scatola sono in inglese, inoltre sulla pendrive c'è un video di come si monta la stampante. Il montaggio è abbastanza semplice, bisogna solo stare attenti alla perpendicolarità dei pezzi e all'allineamento della struttura. La qualità di stampa dipende molto dall'assemblaggio. Su internet ci sono diversi firmware custom che migliorano le prestazioni della stampante. La stampante che ho ricevuto monta la scheda madre 4.2.2 e non la 4.2.7. Ho avuto un piccolo problema con un cavetto che era danneggiato e mi è stato inviato subito un cavetto sostitutivo, ottimo servizio assistenza. Conviene sostituire subito le molle originali del letto di stampa poichè sono troppo morbide e la stampante perde facilmente il livellamento. Ottimo il fatto che nella confezione sia presente anche un pò di filamento per provare subito la stampante. Su internet si trovano diversi file da stampare per vedere se la stampante è stampa correttamente o ha problemi sulla meccanica o sulle impostazioni di stampa. Consiglio l'acquisto. A questo prezzo non si trovano stampanti che stampano così accuratamente.

    Show Original
  • 24/03/2021

    i have fixid and checked all details. when i give electricity power supply is blowed up. 230 volt switch was open but when i open it, it blowed up. how is possible. i will share it all my network. now i need to new power supply. i have shared this site with my director friends for shopping but they gave up because this trouble

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • £206.59
    • £423.50
    • £130.93
    • £160.51
    • £65.82
    • £138.97
    • £182.13
    • £95.08
    • £106.78
    • £72.41
    • £145.15
    • £277.94
    • £255.27
    • £72.41
    • £109.71
    • £200.66
    • £109.71
    • £28.41