Customer Reviews

4.85 out of 5
See all 240 reviews
Write a Review
  • All Reviews (240)
  • Image (55)
  • Video (0)
  • All Star
    • All Star(240)
    • 5 Star(227)
    • 4 Star(3)
    • 3 Star(2)
    • 2 Star(4)
    • 1 Star(4)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 26/10/2021

    Had given up trying to bend a LD-002H to my will..fitted a proper LED driver, masked the LCD with copper tape etc. Still had UV bleed through forming skin and artifacts in the vat which affected the print. next step was a new LCD, still with no guarantee of success. I ordered the Halot as I still have faith generally in Creality, I have 5 of their printers. Out of the box, performed flawlessly ! EXCELLENT quality prints. 1. First, update the firmware to the latest version. Much better than the version supplied. If you can't see the wireless upgrade option, the firmware is just to early. Download from Creality and use the stick. 2. DO NOT look for LED time, base layers etc. in the software. This is all done on the Halot itself. You don't have to bake these settings into the model files now. At first I thought WTF... then very quickly realised sooo much better. 3. There is no calibration card, no matter how many times you pull the packing apart :D . use a piece of A4 paper, after removing the protective plastic, unlike the video... Still a messy way to make models, but the results are awesome !

    Comments (1)
    Show Original
  • 23/08/2021

    First test was positive. I printed a 5cm high Vulpix Pokemon which I modeled and used the Lychee slicer to slice and had to use a own USB pen drive as it didn't come pen drive inside the packaging. But I believe it's possible to place the brackets on some slicer and then open the stl on the halot One's own slicer. This should allow you to send straight from the pc to the printer through her WIFI. First test was positive. I printed a pokemon Vulpix with 1.5 cm height that I modeled and used the Lychee to slice and I had to use the USB flash drive myself because there was no flash drive inside the package. But I believe that it is possible to put the supports in any book and then open the stl in halot One's owner book. This should allow sending it directly from the pc to the printer through its WIFI.

    Comments
    Show Original
  • 10/07/2021

    Shipping was very fast and the printer arrived in great condition. The product was taxed, but at the time of purchase I opted for Banggood's fare insurance and it's going all right to receive the refund. The Banggood customer support team is very good, responds quickly and resolves. As for the product itself, it's a great printer, but it's still in the software development phase. Even so it is the best cost benefit in the market for a 3D printer with mono LCD with 2k resolution. Would recommend!

    Comments
    Show Original
  • 06/02/2022

    Sehr guter Drucker zu einer unschlagbaren Preis-Leistung (117€ bezahlt). Versand sehr sicher verpackt in 2-3 tagen mit DHL. Super! Die Anfangs schlechte Firmware und HalotBox (slicer) sind zum Zeitpunkt des Reviews gut verbessert worden. Insbesondere kommen ständig Updates und Neuerungen - für den Preis wieder sehr lobenswert von Creality. Benutzung mit dem großem Touch Display und Wlan sind ein Traum, ich bin begeistert. Druckergebnisse sind nach erstem Leveln und Einstellen auch sehr gut. Der Arbeitsprozess SLA gegenüber einem FDM ist natürlich etwas aufwändiger die Ergebnisse sprechen aber für sich. Weiter so Banggood und Creality.

    Comments
    Show Original
  • 14/01/2022

    Very good packaging!! Upgrade via Wifi ok all ok came with pen ;) thank you so much banggood put there the photos for my friends PORTUGUESE ;) This order went very well ;)

    Comments (2)
    Show Original
  • 10/02/2022

    very well worked and good packaging as well... nothing is broken. Print a plastic spatoula or buy one because the one that has got inside is metal, buy also a good filtering mask and gloves Nitrile, and protection glasses. Bioethanol is working like isopropyl alcohol as well and it is cheaper. I use both, isopropyl on second wash, or buy water washable ...the printer is 🤘 rocking

    Comments
    Show Original
  • 21/01/2022

    A show! At the first press it went immediately great even as a beginner! Very compact printer, not very large stama plate but just fit.

    Comments
    Show Original
  • 18/03/2022

    works out of the Box. latest Version of the creality slicer is a usable build. nothing to complain. good print results for a low budget. Delivery was also very quick from Cz Warehouse.

    Comments
    Show Original
  • 05/03/2022

    A great resin printer. Very intuitive, touch screen with excellent response. The quality obtained is very good. A good buy. It arrived fast and everything perfect.

    Comments
    Show Original
  • 21/02/2022

    Very good resin printer at a great price. Although it is my first printer in the field of resin, by YouTube research which program to slice like one sets support structures and much more, perfect

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$271.95
    • US$481.95
    • US$2.82
    • US$14.44
    • US$229.95
    • US$219.00
    • US$50.01
    • US$5.24
    • US$4.19
    • US$8.59