Customer Reviews

4.92 out of 5
See all 226 reviews
Write a Review
  • All Reviews (226)
  • Image (34)
  • Video (0)
  • All Star
    • All Star(226)
    • 5 Star(209)
    • 4 Star(16)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 28/01/2021

    In the previous purchase and rehearsal, I was encouraged to purchase this second one, which will solve the Wifi control of another ledger. The last picture shows the button for programming from the previous purchase.

    Comments
    Show Original
  • 08/01/2021

    Az év végi rendelési idő ellenére 10 napon belül megérkezett. Furcsa módon nem házhoz jött, hanem a közelben lévő csomagpontra. Kedvező ár, jó minőség.

    Comments
    Show Original
  • 12/11/2020

    The description mentions a jumper next to the header.. there are no pins there as you might reasonably expect from the wording. Needs jumpers or switches soldered to the board for program and reset functions, else it's just a USB-serial bridge. Others have detailed this n their reviews of the programmer alone. I bodged some jumpers on for the sake of testing, as shown in the photo. Works welll. Will probably get a better programmer if I continue with the 01s and use this board as a PSU/Serial interface, which it will do nicely. The ESP-01 is decent. Better quality soldering than the "programmer". Four starts rather than three because at the time of writing, this bundle costs less than the ESP-01 or the programmer alone.

    Comments
    Show Original
  • 11/11/2020

    I soldered two sma tactile switches to the usb-serial adapter, this way it becames a programming adapter for PlatforIO or Arduino. To start programming mode, push and hold the IO0 switch and push the RST switch.

    Comments
    Show Original
  • 30/03/2021

    Great product very well packaged

    Comments
    Show Original
  • 28/12/2020

    Quick delivery! Rehearsal later...

    Comments
    Show Original
  • 12/11/2020

    you need a jumper to set the programing mode, works well, the ESP01 module came with it was able to program and use on my Pixracer

    Comments
    Show Original
  • 17/01/2021

    Perfect!

    Comments
    Show Original
  • 14/11/2020

    all complete arrived and it look like good

    Comments
    Show Original
  • 26/04/2019

    The Module came quite fast. But I could not conect it to my Windows 10 computer, unfortunatly. The error-message is in the first image. The CH340 driver was installed and works well with another board containig a CH340, as can be seen in the second image. I'm curios, if the installed chip is a CH340 becaus there is no number on the chip (third image). The signs on CH340 are normally visible very well. Because of this the module can not be used - what a pity! For further developement a switch to bring the ESP8266 into fimrware-upload-mode or modified wiring of the CH340 for automatic upload would be advantegouse.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • £2.97
    • £8.93
    • £2.53
    • £3.37
    • £2.97
    • £16.85
    • £11.17
    • £7.49
    • £8.67
    • £4.45
    • £18.61
    • £10.42
    • £3.37
    • £4.63
    • £5.95
    • £6.70
    • £6.70
    • £12.66