Eachine ET5 Mini Gasoline Engine Model Stirling Water-cooled Cooling Structure
A part of the review has been auto-translated.
Top and quickly been delivered. The workmanship is really good at first sight only the start over the attached cord you can save yourself. After a few attempts it starts (needle 2,5-3 revolutions open) and it has to be repeated again and again. I'm going to start remodeling and adjusting for my model today. More pictures to follow.
The engine is a smaller replica of a "Deuz Mah" engine, the engine runs very well, the carburetor is a bit sensitive But with a little patience, he can be very well adjusted. Add 1-2 drops of oil or better WD40 to the petrol and lubricate the piston. In Germany, use washer spirit or aspen spirit. Otherwise, lighter gas can also be used.
It arrived in 9 days after I ordered. As it is made of brass and stainless steel, it is heavy despite its small size. I used Coleman's White Gasoline instead of Gasoline because it has less odor and soot and has better startability. As a precaution, I added 5% of Honda 2-stroke oil. I could easily start it with an electric drill with the attached adapter. The throttle stayed slow and the engine ran for about 30 minutes. A good compression was obtained by running around 3 tanks as a break-in operation. It is a very well-made mini OHV engine. By the way, the capacity of both the cooling water hopper and the fuel tank is about 10cc. If the bore 13mm and the stoke 12mm written in the manual are true, I think the engine is 1.6cc instead of 2.6cc.
Goods arrived on 20-Mar-2021,10days after placed the order. Excellence in lead time comparing to similar product which has almost the same price on others online seller. Engine run well at first start
Hello ^ - ^ Even though it's small, it's heavy and powerful.
Fast shipping Package received ahead of time.I think I'm buying more of these motors..
Very nice engine, based on the Deutz MAH motor. The difference: the Deutz is a Diesel engine, but the Eachine ET5 runs on petrol. Following the instructions the engine started on the second attempt after opening the carburettor just a bit. No adjustment of the needle valve was needed. The engine runs nicely between about 800 and 2000 rpm (no load). Just to clarify: this motor is NOT a Stirling engine, but a proper 4-stroke petrol engine with a proper spark plug and magneto-electronic ignition. The displacement is 1.6 cc, and NOT 2.6 cc, as stated in several descriptions. Last but not least: very quick delivery.
Nice item, very fast shipping, AAAAA++++++++++
Good morning. Thank you for your confidence and the package are well packed and clean.
nice