Customer Reviews

4.94 out of 5
See all 293 reviews
Write a Review
  • All Reviews (293)
  • Image (59)
  • Video (3)
  • All Star
    • All Star(293)
    • 5 Star(276)
    • 4 Star(16)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 25/04/2021

    arrived with a little delay.. assembled and configured with the various tutorials on YouTube.. first flight everything ok, at the second lost suddenly the video signal and drone dropped in a concrete channel and destroyed, nn I know if it is the fault of my goggles (eachine ev800d) or the vtx, fact is that now I have to find the various spare parts or buy another one by evaluating the expense. .

    Comments (2)
    Show Original
  • 07/12/2020

    I get all the composites, I arrive fast and it looks good. although I will put another frame same looks excellent, the engines look good quality. the frame if it seems that it broke in my first crash. It'll be my first fpv drone and I'm sure I made a good choice. The only changes I'll make will be the vtx and frame. All great

    Comments
    Show Original
  • 14/04/2021

    Super Product for the price, everything is in the kit. I testet it with an 5s 1080 mah 75c Lipo and got easy 6-7 minutes of crousing arround. The Motors sound hard at the first two or three packs but then they get smooth and running good. If you build it with the esc`s up and solder the motors just wire after wire even you do not have to change the motor directions in BL-Heli. Take care when you solder the RX. You can run it on 4 , 5 or 6 s but with 5s it´s already a Rocket.

    Comments
    Show Original
  • 24/12/2020

    I ordered a tyro and it didn't get to me within a month from the Czech Republic. The package was insured and the service department sent me a second one that arrived after four working days. The whole package didn't break down either. Now we're building and testing it right on the 6s.

    Comments
    Show Original
  • 18/09/2021

    Great quad! Super easy to build if you follow one of many tutorials on YouTube! I used the joshua bardwell one, it's broken down into "episodes" which is really handy. This thing will move on 4s or 6s. We'll recommended to any beginner. Really quick delivery to the UK too with no additional taxes.

    Comments
    Show Original
  • 04/06/2021

    the goods are slow. but it finally came to me. I don't know where to start with it. The big challenge

    Comments
    Show Original
  • 28/12/2020

    Bought also a FRSKY XM+ receiver and connected through sbus (needed soldering). Bound with a Radiomaster without any problem. Changed the antenna for a RHCP (SMA). Easy setup through Betaflight and I have good picture through my goggles. Even though this Tyro has the supported firmware version, RPM filtering is not working yet. Indoor tests without propellers were successful. I can't wait to make my first test flight outside, but with these new regulations in the EU i'll have to wait to earn a license first.

    Comments
    Show Original
  • 23/05/2021

    Tyros are the best DIY series for learning how to build a quad. Not only is it heavily documented on the internet by several YT-vids, but the quad-god JB himself dedicated it a whole build series to it so that you can barely make any mistake. As JB mentioned in his series, even SmartAudio (the thing where you can set VTX-power, channels, PIDs and what-not over your goggles; basically an in-game menu for your quad settings) is available with even an extra cable, or you step up your soldering skills and add a teeny-tiny copper cable via a wiring pencil from the FC to the VTX as shown in the image. Get the pins according to the datasheet or JBs video where you can copy the location of the data port. The motor wires are mostly too long, so you may cut them to get a neater look of your quad. But be aware not to cut them too far, i almost made this mistake and had happy time forcing the cables in their position. As a receiver, i used the FrSky XM+. Needed to update my radios (TX16S) internal module to get it to bind. It even has RSSI on AUX12 which can be displayed in the OSD. Used zip-ties to force the antenna cables to stand up right. Flashed Betaflight 4.2 without any trouble.

    Comments
    Show Original
  • 21/08/2021

    My firs fpv quad. Waiting for ELRS module so i can finally fly it. All tests i done so far, indicates that drone work as intended.

    Comments
    Show Original
  • 12/11/2020

    Hello I have a big problem I can not weld an engine pad because on the flight card there is only plastic and it does not contact thank you for helping me!!

    Comments (2)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • £149.00
    • £103.25
    • £154.88
    • £139.39
    • £169.63
    • £78.32
    • £174.05
    • £92.19
    • £68.58
    • £110.62
    • £62.68
    • £178.11
    • £92.04
    • £280.26
    • £184.38
    • £265.51
    • £804.62
    • £77.85