FPV 5.8G 10-200mW Adjustable Audio Video Transmitter Module TX-58120 for RC Airplane
A part of the review has been auto-translated.
What you need to know !!!
just got my,but how can I connected or set it up!? it doesn’t come with any instructions or diagram to wired it up! wth! all I see it,4 tiny azs hole! which’s 1 is neg,pos,& sig.?
Good TX , good efficiency,
parace bien, es muy chico a pesar de ser de los mas grandes
This is a very basic transmitter, so I wasn't expecting much, but it actually looks like it will be a solid performer
We need a picture of the transmitter with the connectors identified to see one really working. The lack of this information doesn't help to use it quickly ! The use of it is for some body knowing still electronic and some skill to solder the connection ! it is better to use this connector to solder the cables : 2mm 1 x 40pin Single Row Breakaway Male Pin header for Arduino DIY
It uses an unusual SMA connector for the 5.8GHz antenna. In a nutshell it does not fits to common antennas. I had to replace it. The pinout must be reverse engineered since nothing is described. (my findings, counted from the push button) 1: Vcc (thick trace connected) 2: GND (connected to big plane) 3: Video Input Channel seperation is bad. You are likely to disturb others. But in the end it works.