Customer Reviews

4.6 out of 5
See all 10 reviews
Write a Review
  • All Reviews (10)
  • Image (1)
  • Video (0)
  • All Star
    • All Star(10)
    • 5 Star(7)
    • 4 Star(2)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 05/03/2022

    received as described. good seller.

    Show Original
  • 14/01/2019

    Not for the faint hearted. Yes, it requires soldering of SMD components. This item is more work than the smaller flat rotaters because you need to solder 4 24 pin SMD chips.It is definitely easier than the spheric rotator in which you must also solder the little LED's at the side of a PCB. It is not clear from the description that this model runs on 12V. But it is mentioned on the PCB and in the schematic. Testing can be done on 5V, because it will rotate, and the LED's will light up. But the turning is off. I have yet to find out how to set the clock. One person mentioned that the 1.5K resistors are missing. Yes, but a set of 2.2K resistors are provided instead. Use these. There are NO spare LED's, so be careful not to loose even one. I ordered the blue kit, which has a red LED on the most outwards position. But that LED is not supplied. I took one from my box with spares. Be careful with the LED receiver. Follow the manual as you have not to follow the direction on the PCB. This is mentioned on several places. For the DC female connector you must disobey the manual as it is wrong at that point. Ignore the middle connector. I blew the U4 chip, with the result that LED 5 will not light up. I might repair that later on. Otherwise: a decent kit, but certainly a bit expensive. Oh, and I have not been busy with the reprogramming. All is in Chinese. I have to subtract points for that one. Their appear to be only 3 pre-loaded pictures. Value for price: too expensive, costs 2 points. Quality: for the exchanged resistors, missing outer LED, lack of description on how to set the clock, costs 2 points Appearance: lack of english description on how to replace the code: costs 1 point.

    Comments (5)
    Show Original
  • 19/02/2019

    good, fun project. :)

    Show Original
  • 27/10/2022

    looks good all arrived ok. not built yet

    Show Original
  • 13/04/2021

    I'm still waiting for an answer on what to do with the show because the motherboard is faulty.

    Show Original
  • 19/10/2020

    Thank you for my order

    Show Original
  • 18/08/2020

    Very well packed and undamaged arrived at me. Will recommend you. Thank you

    Show Original
  • 02/11/2019


    Show Original
  • 18/05/2021

    very nice

    Show Original
  • 26/02/2019

    i tried and failed (probably because of my fault). i will recomend this only for experienced electricians. you gona be soldering components smaller than 1mm.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$6.29
    • US$8.99
    • US$3.99
    • US$28.99
    • US$2.99
    • US$14.99
    • US$3.30
    • US$26.99
    • US$21.99
    • US$11.74
    • US$9.99
    • US$9.69
    • US$15.99
    • US$8.49
    • US$11.99
    • US$15.99
    • US$11.84
    • US$35.99