Customer Reviews

4.91 out of 5
Write a Review
  • All Reviews (53)
  • Image (2)
  • Video (0)
  • All Star
    • All Star(53)
    • 5 Star(48)
    • 4 Star(5)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • June-10 2020 05:06:33

    Un producto muy recomendado.

  • July-15 2019 16:46:20

    Good quality, quite heavy and stable. User manual is only in Chinese. It's also a I plug (China, Australia, etc.)

  • November-21 2020 06:59:01

    The desoldering gun S-998 is not working, NOT as described. The tip heating system is insufficient, even with the maximum temperature the freshly sucked tin solidifies at the end of the tip tube and does not fall into the collection tube. More than once you have to take a real soldering iron, Weller, and heat the end of the tip’s tube from the inside (first removing the collection tube with the filter) to dissolve the accumulated tin that completely closes the tube itself. Or you have to unscrew

    Comments (1)
  • November-05 2020 15:35:49

    To whom it may concern - the power cord of the pump has a connector for Australia even though my address is Switzerland - an adapter for Australia to Germany came with the pump. This doesn't help because the connector of Germany and of Switzerland are not alike. Not counting the power cord problem the tool works very well and can be recommended. Kind regards.

  • January-26 2020 05:53:59

    Hello just received and used one time, and a bad odor came out with a strange sound like a plop we have opened the case and PCB is burnt .... we will contact after sales srevice to fournd a solution to the problem encountoured regards

    Comments (2)
  • November-20 2020 14:08:52

    Product received in good shape, I carried a little test , and so far seems to work well

  • October-03 2020 01:03:14

    fonctionne très bien ! vraiment pratique et rapide.

  • June-10 2020 09:48:48

    Good machine for desoldering.

  • January-10 2020 20:51:10

    Works very well! Thanks!

  • December-28 2018 02:06:19

    Heavy. Feels good in the hand. Strong suction. Will take a few hours to get the hang of it properly. It will block very often if you do short sharp sucks. Be sure to suck the hole fully, for around 2 seconds, to ensure all the solder has gone all the way through the tip tube. If it gets badly blocked, you need to remove the tip and heat it to melt the solder inside. If it's only blocked at the opening inside the plastic tube, you can heat that with a regular soldering iron and push it down into the

    Comments (1)

    Go to page


    You might be interested in

    recommendation for you
    • £75.82
    • £79.61
    • £11.71
    • £30.93
    • £27.29
    • £28.41
    • £27.29
    • £32.60
    • £75.82
    • £6.82
    • £28.81
    • £5.41
    • £15.16
    • £18.95
    • £4.54
    • £6.82
    • £33.70
    • £29.57