GY-91 MPU9250 BMP280 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor Module
A part of the review has been auto-translated.
Works! Included: Adafruit_BMP280 library and SparkFunMPU9250-DMP library. To let an ESP32 with OLED work together with BMP280/MPU9250 is a bit tricky, you have to use the following pins and I2C addresses: const uint8_t I2C_SDA_PIN = 5; const uint8_t I2C_SCL_PIN = 4; const uint8_t I2C_ADDRESS_BMP280 = 0x76; const uint8_t I2C_ADDRESS_MPU9250 = 0x68; const uint8_t I2C_ADDRESS_OLED_DISPLAY = 0x3C; You have to modify both libraries to use the pins above (and not the standard ones) for ESP-32-with-OLED, because the OLED requires already usage of PIN4 and PIN5.
Shipping really fast. The board works as expected. It is nice to have 10DOF in a single board. I replaced the MPU6050 with this board for a camera stabilization system. An article here: https://lemariva.com/blog/2018/06/micropython-camera-stabilisation-application You can find the open-source code: https://github.com/lemariva/uPyIMU It's a nice and simple project that combines: ESP32, 9g Servo Motors and the GY-91. All items bought here in Banggood! Here a Video: https://youtu.be/oNTScnM_1qg
I'm in good condition, I haven't tried it yet, but it's good.
works fine
Thank you for fast delivery, very good products
I'm very pleased with the devices.
All seems very nice. Haven't tested yet
It is an interesting product at a reasonable price.I haven't yet run extensive tests but it looks good. Packaging was quite essential but product was delivered in good shape.
super!
Good. received as description.