Customer Reviews

4.89 out of 5
See all 395 reviews
Write a Review
  • All Reviews (395)
  • Image (45)
  • Video (1)
  • All Star
    • All Star(395)
    • 5 Star(362)
    • 4 Star(25)
    • 3 Star(6)
    • 2 Star(0)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 09/11/2019

    Go unlucky and received a unit from a lower quality batch. No support for the ICs, missing resistor meaning the power LED does not work, badly connected resistor, and even an inductance mounted SMD style because the leads were cut too short. The solder joints have not been heated enough and the solder did not penetrate in the vias. The board is pretty dirty (flux and solder residues that could short tracks). Otherwise, the device works and is quite cheap. It comes with a lot of accessories which is useful.

    Comments
    Show Original
  • 10/11/2019

    Cheaper geiger counter This is a good geiger counter at cheaper price, perfect to connect with a ESP or arduino module to make a portable radioactivity meter. The board show the particle detected via a buzzer a red led and via TTL pulse output. The module can be connected to battery pack (primary or NI-Mh cell) or directly powered from an Arduino or ESP module via 5V pin. Useful to continuos meter the enviromental radioactivity. A good Geiger counter +++

    Comments (2)
    Show Original
  • 23/12/2017

    I was very surprised about the high quality of the packaging. The module works immediately very well and sometimes detects cosmic rays. I tested it with a source of Americium 41( who is inside of a old radioactive smoke detector ). I recommend this module, good quality for the price. Thank you Bangood. Sorry for my poor english language, i'm french.

    Comments
    Show Original
  • 20/03/2020

    The product matches the description. At the time of purchase, the best price. Thanks to the seller for packing the meter tube came not broken (the most important thing in this device). The quality of the soldering is not at the highest level (probably solder drops hit the charge - perhaps it is a private case, fortunately without closure), which did not affect the performance. After the connection has started immediately base problems, the indicator blinks, the beep is present.

    Comments
    Show Original
  • 19/12/2020

    The Geiger counter arrived after two weeks in UK with the tube safely packed in a piece of plastic pipe. The PCB can accommodate tubes of 2 lengths. Unfortunately the shipped tube is shorter than the smallest position and it is not firmly hold in position. What I did was de-solder one holder, drill another hole in the PCB and then re-solder the holder. This has shortened the gap with 8mm and now to tube is hold properly in place. I've purchased a thorium gas lantern mantle (from old stock) and verified that the counter works. The tube is not the most sensitive but can be replaced if needed. The anode voltage is around 400V. Before and after the mod pictures are attached.

    Comments (1)
    Show Original
  • 31/07/2021

    Excelent product, arrived in a fairly good time, was extremely well packaged, with lots of foam and with a special case for the glass tube, and everything worked perfectly. All accessories are a great plus, and the Geiger Counter itself (circuits and tube) is the best product that I have found available for this price. I absolutely recommend it.

    Comments
    Show Original
  • 19/06/2020

    Hooked this up to an ESP32 using the Pulse pin and wrote a very simple counter / dosimeter program for it. Really impressed, accuracy seems spot on also.

    Comments
    Show Original
  • 22/10/2019

    Recibido hoy (pedido el 10/10). Envío un poco lento, pero ha llegado en perfectas condiciones. Muy bien protegido, doble caja de cartón y tejido acolchado. Lleva un protector de plástico para proteger el circuito y el tubo. Este protector es muy sencillo de instalar (recuerden retirar el film protector que lleva para que no se vea opaco). Los cables y el portabatería de buena calidad. Circuito con buenas soldaduras y bien terminado. Probado, a falta de conectar a Arduino, funciona a la perfección. No lleva ningún tipo de manual, pero la información que facilita el fabricante en la página del producto es más que suficiente. Comunicación con el vendedor profesional, atenta y rápida. Muy recomendado! En definitiva EXCELENTE!

    Comments
    Show Original
  • 11/05/2021

    This arrived extremely well packed, with some minor assembly needed (tube and top cover)... initially it made a hell of a screech when turned on, but a bit of emery rubbed on the GM tube contacts and the test jumper removed fixed the issue. I've always wanted a Geiger Counter, and love it!!!! I plan to connect it in with the GPS receiver, mini display and store the values to an sd card in CSV format.

    Comments
    Show Original
  • 08/03/2021

    It was very well packed. The tube is a little shorter, so it has to be put on carefully and it works. I have one more tube and it is longer than the connectors on the board. Life is sometimes quite complicated :-) The device works, I tried it on an old CRT TV. It was necessary to attach the tube directly to the screen and then it beeped quite quickly. I can't verify accuracy and sensitivity, so I have it as a fun toy.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$2.99
    • US$29.84
    • US$3.99
    • US$3.99
    • US$28.99
    • US$3.30
    • US$9.69
    • US$2.29
    • US$1.99
    • US$1.99
    • US$41.99
    • US$2.99
    • US$3.99
    • US$8.99
    • US$16.99
    • US$5.99
    • US$10.69
    • US$2.81