Customer Reviews

4.87 out of 5
See all 68 reviews
Write a Review
  • All Reviews (68)
  • Image (6)
  • Video (0)
  • All Star
    • All Star(68)
    • 5 Star(63)
    • 4 Star(3)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 10/12/2021

    It has been good packed. Nothing has been damaged in shipping. As you can se it is a lot of small SMD components. It was not instruction included or any link in package. I hope I will find instruction somwhere in internet on this.

    Comments
    Show Original
  • 12/10/2021

    The documentation (the BOM) found online is incorrect with the products we received. The markings on the PCB are not in line with values of the capacitors. The handwritten notiation on the packaging of the capacitors is not readable . Several components have already been soldered to the pcb (before arrival), at least one of those components (resistor) has the wrong value compared to the notation on the board.

    Comments
    Show Original
  • 29/10/2017

    Упаковано хорошо, на пайку времени нет, обязательно если есть возможно отпишусь дополнительным отзывом.

    Comments
    Show Original
  • 14/12/2017

    free shipping, cheap in price and good quality. All you need is skills and you're good to go

    Comments (3)
    Show Original
  • 19/09/2017

    It came in three weeks. I am satisfied with the purchase. I recommend!!!

    Comments
    Show Original
  • 19/10/2017

    looking forwart to build this kit successfull

    Comments
    Show Original
  • 20/02/2021

    Poorly designed, the moment it starts to rotate the LED arms smash into the power board - clearly it's not been tested in its final design. So far, there is no activity on the LEDs. at all. I don't know if this is a fault in the design, a faulty component, or a fault in construction. I've completed similar kits (including the very similar linear rotating surface mount LED kit on sale here, and kits with surface mount chips) with a 100% success rate.

    Comments (1)
    Show Original
  • 14/11/2021

    It works and looks great! I got it to work on the first pass by being ultra careful with all the solder joints. Check, check and check again. You will want a microscope to deal with soldering all the LEDs. This kit is non-trivial - if you are not experienced building kits like this, you will probably not succeed. This kit has all the usual issues with the instructions: poor English, limited explanations, inconsistencies between the parts and in the instructions, and so on. All the needed parts are in the kit and I eventually figured out everything from the provided materials. This is what makes something like this fun. So if you are up to the challenge, I strongly recommend this kit.

    Comments
    Show Original
  • 25/02/2021

    Nice toy, absolutely amazing. The SMD soldering requires quite some skill and some rework and resoldering might be necessary in some cases. For example I experienced that some of the 90 degree solder connections to the LED boards had cracked probably due to mechanical forces during the runs and the handling. Therefore I have investigated the electrical connections for testing and repair purposes. Please see the attached images of the LED connection pads and driver chip ports in summary. Hoping that this helps troubleshooting - have fun.

    Comments
    Show Original
  • 06/12/2021

    excellent but the assembly instructions are quite poor, not all the parts you know where to put them.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$6.99
    • US$15.29
    • US$16.38
    • US$14.68
    • US$10.99
    • US$7.34
    • US$15.29
    • US$9.17
    • US$4.25
    • US$10.39
    • US$44.99
    • US$10.91
    • US$15.29
    • US$16.99
    • US$7.93
    • US$10.86
    • US$11.75
    • US$18.99