Customer Reviews

4.98 out of 5
Write a Review
  • All Reviews (243)
  • Image (71)
  • Video (0)
  • All Star
    • All Star(243)
    • 5 Star(237)
    • 4 Star(6)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 17/03/2021

    Nice frame, good amount of accessories, batery strap, spare screws, posts, stickers... Frame machining is good quality, everything fits nice. the edges are not sharp. Nice job. I have one knock-off frame and while it works as well the machining quality is not quite there... Also big plus is the weight, only about 105g. Be careful tho this version will NOT fit the DJI FPV camera the mount is too narrow for that... I had to print and adapter mount. (There is a version of this frame for DJI HD I just did not know that at the time...)

    Show Original
  • 25/09/2020

    Purchased to have a large battery I also own a similar frame of Jarvis, which looks like a 4S/3300mAh We decided to buy it assuming it was almost the same as we could see in the images Jarvis has 2307/2600 kv 5050-3 4S/2600 mAh Throttle margin exceeds 170 km/h (GPS measurement) It's about five minutes to fly and about 25% left Based on this, Mark4 built on 2306.5/2550kv 5150-3 4S/3000mAh As it looks, Mark4 and Jarvis are roughly the same The arm is slightly widened, and it is nearly H-shaped, Mark4 Of course, Mark 4 is good in construction, all but the plates attached to the front and rear of the bottom face are chamfered and other cross-sectional treatment is clean Kodawali can also be found on standoffs, how to install camera plates, etc The rear end standoff spacing is the same, so the GPS module mount for Mark4 is also available in Jarvis There's plenty of stack space, and I'm ESC/FC/isolated plate/RunCam hybrid4K board in center Capacitor/isolated plate/VTX/isolated plate/receiver configuration on the rear The camera size requires caution and the hybrid4K cannot enter without processing The left and right are somehow in, but the top and bottom and mounting holes are out If you can do the processing, you can ride the hybrid4K, you can use the action camera, you can use the large battery, and GPS is easy Good build, lightweight and satisfying frame I want to build another one with Mark4 (^-^)

    Show Original
  • 12/03/2021

    This frame is made of a good quality carbon fiber. There is a plenty of space, even in the rear of the camera. There are also a lot of STL file available online (especially on thingiverse) so you can support your building design with a lot of 3D printing ideas. Very good!

    Show Original
  • 14/08/2020

    Mark4 7" version: super quality light frame with lots of work space and superb hardware. My favorite light freestyle frame so far. Great work GepRC. :)

    Show Original
  • 15/03/2021

    very good budget frame. I like it. I got 3 of them and they took big crashes mostly without serious demage.

    Show Original
  • 18/02/2021

    Top notch!

    Comments (1)
    Show Original
  • 16/09/2020

    The frame is super-made and the quality of the carbon is at the highest level,. Everything obviously mega packed.I bought the 260mm size 😁

    Show Original
  • 27/04/2021

    Macht einen Qualitativ hochwertigen Eindruck. Sobald er fertig aufgebaut ist, werde ich meine Erfahrungen teilen.

    Show Original
  • 18/03/2021

    absolut amazing frame! very well build and totally great to fly!

    Show Original
  • 19/09/2020

    Good quality product. I recommend buying.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • £3.11
    • £26.61
    • £19.96
    • £31.79
    • £30.44
    • £56.19
    • £48.06
    • £29.59
    • £27.65
    • £13.97
    • £46.58
    • £34.01
    • £4.34
    • £24.40
    • £26.61
    • £36.97
    • £27.15
    • £24.40