indeed in 8 working days very fast DHL bravo for the fast and safe transfer of the package .. thanks bangood !! The only thing I found And it looks in a photo, in the nozil next to it is so tight the part That is crooked..I do not know if it should be so I hope Yes Do not cause me any defect..Otherwise everything is fine .. I will return with comments the function of the prinder !!

indeed in 8 working days very fast DHL bravo for the fast and safe transfer of the package .. thanks bangood !! The only thing I found And it looks in a photo, in the nozil next to it is so tight the part That is crooked..I do not know if it should be so I hope Yes Do not cause me any defect..Otherwise everything is fine .. I will return with comments the function of the prinder !!

indeed in 8 working days very fast DHL bravo for the fast and safe transfer of the package .. thanks bangood !! The only thing I found And it looks in a photo, in the nozil next to it is so tight the part That is crooked..I do not know if it should be so I hope Yes Do not cause me any defect..Otherwise everything is fine .. I will return with comments the function of the prinder !!

Super fast delivery, less than 48H Very well packaged, but by Tevo herself, the bangood didn't use a box, but honestly it's not necessary. The printer comes in a kit, practically all of it broken down, requires patience and care to assemble, to be perfect. Once ready the print quality is amazing, the engines see perfectly calibrated of manufacture, it is practically just to use.

Super rápido a entrega, menos de 48H Muito bem embalada, mas pela própria Tevo, a bangood nao usou caixa, mas sinceramente nao é necessário. A impressora vem em kit, praticamente toda desmanchada, requer paciência e cuidado a montar, para ficar perfeita. Depois de pronta a qualidade de impressão é surpreendente, os motores veem perfeitamente calibrados de fabrica, praticamente é so usar.

Super fast delivery, less than 48H Very well packaged, but by Tevo herself, the bangood didn't use a box, but honestly it's not necessary. The printer comes in a kit, practically all of it broken down, requires patience and care to assemble, to be perfect. Once ready the print quality is amazing, the engines see perfectly calibrated of manufacture, it is practically just to use.

fast shipping. printer works good right after assembly. cons i have are no filament cutter, no boot on the hotend, fan on the board and should have higher amp powersupply. other than that, wokrs good

fast shipping. printer works good right after assembly. cons i have are no filament cutter, no boot on the hotend, fan on the board and should have higher amp powersupply. other than that, wokrs good

fast shipping. printer works good right after assembly. cons i have are no filament cutter, no boot on the hotend, fan on the board and should have higher amp powersupply. other than that, wokrs good

30 günde bana ulaştı. Aslında gümrüğe takıldı, kendiniz almaya gelmelisiniz dendi.Mail attım işleme aldılar. Ancak ben gidip gümrükten kendim aldım. Türkiye için %20 vergi çıkıyor. Buna ek olarak ta 8,7TL damga ve sunum ücreti var. Ben gümrük sigortalı almıştım. İade çin başvurumu yapacağım. Bilgilendiririm. Ürünü henüz kurmadım. Ender 3 Pro yerine bunu tercih ettim. Ürün için tekrardan değerlendirme yazmayı planlıyorum. Teşekkürler

30 günde bana ulaştı. Aslında gümrüğe takıldı, kendiniz almaya gelmelisiniz dendi.Mail attım işleme aldılar. Ancak ben gidip gümrükten kendim aldım. Türkiye için %20 vergi çıkıyor. Buna ek olarak ta 8,7TL damga ve sunum ücreti var. Ben gümrük sigortalı almıştım. İade çin başvurumu yapacağım. Bilgilendiririm. Ürünü henüz kurmadım. Ender 3 Pro yerine bunu tercih ettim. Ürün için tekrardan değerlendirme yazmayı planlıyorum. Teşekkürler

30 günde bana ulaştı. Aslında gümrüğe takıldı, kendiniz almaya gelmelisiniz dendi.Mail attım işleme aldılar. Ancak ben gidip gümrükten kendim aldım. Türkiye için %20 vergi çıkıyor. Buna ek olarak ta 8,7TL damga ve sunum ücreti var. Ben gümrük sigortalı almıştım. İade çin başvurumu yapacağım. Bilgilendiririm. Ürünü henüz kurmadım. Ender 3 Pro yerine bunu tercih ettim. Ürün için tekrardan değerlendirme yazmayı planlıyorum. Teşekkürler

This is the best hobby investment I've made in a long time! This printer is amazing value for money, and while I bought mine on sale for $170, the normal price is still incredibly low for what it delivers. I've owned a Creality Ender 3 for years, and this has become my go-to for every filament, complex, sizable models, it's just better at everything. The one con I can point out about the Tarantula Pro is the complete lack of information out there for it - of course, FDM printers in general are a DIY nightmare, but this printer, in particular, is a dearth of info. So, things to keep in mind: 1 - The cooling fans on this printer do NOT mess around. I have no idea what I'll ever need 100% fan speed for. Print PLA with 40%, 50% if you have overhangs. Less if you need strength. If you leave the fans at 100%, the printer will go into thermal runaway at about 225C, as the hotend cannot keep pace. 2 - The hotend is a HUGE WIN, and can accurately slap down plastic at 80mm/s. It can stay hot no matter how fast I print. But again, zero information given, so "J-style, V6, Volcano, 21mm"are the terms you'll need to replace heads on it. 3 - Tighten your belts. When you think they're tight enough, tighten them again. 4 - Molybdenum grease for the Z screw. Apply it with your least favorite rag, shuttle your gantry up and down, then wipe it all off. 5 - The build surface is great. The adhesive on the bottom is garbage, and trapped air in mine are now bubbles on the build surface. PEI plate inbound. 6 - 0.1mm layers at 40mm/s, 40% fan results is fantastic quality prints. 0.15mm layers at 60mm/s almost cuts the time in half. 7 - 7mm retract, at 50mm/s. The Volcano is a big hot nozzle, and you need big hot, sweaty retraction. Oh my... 8 - The screws on the extruder will work themselves loose. The human that owns them will tighten them over time. 9 - It comes in the wrong box. Do not get excited, you did not get the RS. Please ask any questions here or at Ghost Ryder FPV on YouTube.

This is the best hobby investment I've made in a long time! This printer is amazing value for money, and while I bought mine on sale for $170, the normal price is still incredibly low for what it delivers. I've owned a Creality Ender 3 for years, and this has become my go-to for every filament, complex, sizable models, it's just better at everything. The one con I can point out about the Tarantula Pro is the complete lack of information out there for it - of course, FDM printers in general are a DIY nightmare, but this printer, in particular, is a dearth of info. So, things to keep in mind: 1 - The cooling fans on this printer do NOT mess around. I have no idea what I'll ever need 100% fan speed for. Print PLA with 40%, 50% if you have overhangs. Less if you need strength. If you leave the fans at 100%, the printer will go into thermal runaway at about 225C, as the hotend cannot keep pace. 2 - The hotend is a HUGE WIN, and can accurately slap down plastic at 80mm/s. It can stay hot no matter how fast I print. But again, zero information given, so "J-style, V6, Volcano, 21mm"are the terms you'll need to replace heads on it. 3 - Tighten your belts. When you think they're tight enough, tighten them again. 4 - Molybdenum grease for the Z screw. Apply it with your least favorite rag, shuttle your gantry up and down, then wipe it all off. 5 - The build surface is great. The adhesive on the bottom is garbage, and trapped air in mine are now bubbles on the build surface. PEI plate inbound. 6 - 0.1mm layers at 40mm/s, 40% fan results is fantastic quality prints. 0.15mm layers at 60mm/s almost cuts the time in half. 7 - 7mm retract, at 50mm/s. The Volcano is a big hot nozzle, and you need big hot, sweaty retraction. Oh my... 8 - The screws on the extruder will work themselves loose. The human that owns them will tighten them over time. 9 - It comes in the wrong box. Do not get excited, you did not get the RS. Please ask any questions here or at Ghost Ryder FPV on YouTube.

This is the best hobby investment I've made in a long time! This printer is amazing value for money, and while I bought mine on sale for $170, the normal price is still incredibly low for what it delivers. I've owned a Creality Ender 3 for years, and this has become my go-to for every filament, complex, sizable models, it's just better at everything. The one con I can point out about the Tarantula Pro is the complete lack of information out there for it - of course, FDM printers in general are a DIY nightmare, but this printer, in particular, is a dearth of info. So, things to keep in mind: 1 - The cooling fans on this printer do NOT mess around. I have no idea what I'll ever need 100% fan speed for. Print PLA with 40%, 50% if you have overhangs. Less if you need strength. If you leave the fans at 100%, the printer will go into thermal runaway at about 225C, as the hotend cannot keep pace. 2 - The hotend is a HUGE WIN, and can accurately slap down plastic at 80mm/s. It can stay hot no matter how fast I print. But again, zero information given, so "J-style, V6, Volcano, 21mm"are the terms you'll need to replace heads on it. 3 - Tighten your belts. When you think they're tight enough, tighten them again. 4 - Molybdenum grease for the Z screw. Apply it with your least favorite rag, shuttle your gantry up and down, then wipe it all off. 5 - The build surface is great. The adhesive on the bottom is garbage, and trapped air in mine are now bubbles on the build surface. PEI plate inbound. 6 - 0.1mm layers at 40mm/s, 40% fan results is fantastic quality prints. 0.15mm layers at 60mm/s almost cuts the time in half. 7 - 7mm retract, at 50mm/s. The Volcano is a big hot nozzle, and you need big hot, sweaty retraction. Oh my... 8 - The screws on the extruder will work themselves loose. The human that owns them will tighten them over time. 9 - It comes in the wrong box. Do not get excited, you did not get the RS. Please ask any questions here or at Ghost Ryder FPV on YouTube.

ürün gayet güzel paketlenmiş türkiyede 263,70 vergisi çıktı, gelen kargocuya ödemek durumunda kaldı 1 ay gibi bir sürede teslim edildi

ürün gayet güzel paketlenmiş türkiyede 263,70 vergisi çıktı, gelen kargocuya ödemek durumunda kaldı 1 ay gibi bir sürede teslim edildi

ürün gayet güzel paketlenmiş türkiyede 263,70 vergisi çıktı, gelen kargocuya ödemek durumunda kaldı 1 ay gibi bir sürede teslim edildi

Hızlı Kargo Sağlam Teslimat. İlk Baskılar Gayet Güzel Görünüyor Tevo Harika :)

Hızlı Kargo Sağlam Teslimat. İlk Baskılar Gayet Güzel Görünüyor Tevo Harika :)

Hızlı Kargo Sağlam Teslimat. İlk Baskılar Gayet Güzel Görünüyor Tevo Harika :)

I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.

I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.

I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.

kargo trde elime 45 günde ulaştı ama vergi ödemedim. baskı bakimindanda makine güzel tavsiye ederim

kargo trde elime 45 günde ulaştı ama vergi ödemedim. baskı bakimindanda makine güzel tavsiye ederim

kargo trde elime 45 günde ulaştı ama vergi ödemedim. baskı bakimindanda makine güzel tavsiye ederim

The printer arrived in great condition, every part of it was ok. Assembled it yesterday and works like a charm! Very good product! Delivery was 14 workdays from shipping day to Hungary.

The printer arrived in great condition, every part of it was ok. Assembled it yesterday and works like a charm! Very good product! Delivery was 14 workdays from shipping day to Hungary.

The printer arrived in great condition, every part of it was ok. Assembled it yesterday and works like a charm! Very good product! Delivery was 14 workdays from shipping day to Hungary.