Customer Reviews

4.94 out of 5
Write a Review
  • All Reviews (62)
  • Image (5)
  • Video (0)
  • All Star
    • All Star(62)
    • 5 Star(59)
    • 4 Star(2)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • 2016-08-30 15:26:25

    for a long I was looking for a handy, easy to store as I intended to use it 3x a year, oscilloscope for assorted close to DC measurements (i.e. up to 10MHz). The best of if it'd be a USB device so that I can use a PC/laptop screen. I've came across this lovely box. I've came across only this lovely box == not much choice :-). I was afraid of the W10 64b compatibility, the GUI and general functionality. Today I can see that there is no problem at all. It's true that to install the windows driver I

    Comments
  • Amigo65
    ES
    2016-01-15 11:14:34

    He analizado un circuito inversor en un primer contacto con este osciloscopio y me ha sido muy útil. En contra he observado que ante el impulso electromagnético que genera mi fuente de alimentación al arrancar,este hace que se cuelgue el osciloscopio, incluso desconectado y tengo que reconectar el USB y reiniciar; lo cual no me agrada nada. Eso por el momento.

    Comments
  • 2017-12-08 14:39:33

    This scope is good because it dimension and price. It work very well.

    Comments
  • 2017-05-21 03:32:38

    Very good and easy to use osciloscope!!

    Comments
  • 2017-12-20 15:23:40

    It works very well. Small size. 2 probes with 1x - 10x switch.

    Comments
  • 2020-08-30 06:11:39

    very useful equipment

    Comments
  • Rahul
    IN
    2017-07-21 02:16:56

    First of all, I think it's an excellent value at $80. I would get one again. That said, I'll now list the weaknesses. The triggering is poor. It's hard to get a waveform positioned exactly right on the screen. There is no AC coupling. DC only. The scope is NOT isolated from USB ground, which on a computer is typically connected to the ground on the wall plug. You cannot connect the ground clip of a probe to (say) line voltage to take a reading. You'll need to either use an isolation transformer,

    Comments
  • 2015-04-21 14:13:44

    As expected. Good quality of all the items, cables, etc. Packed in original box which protects all things. Have no chance to test all the modes, but my brief "smoke test" shows that it works. (Ive connected both channels to square gen output and it showed me what I expected - almost perfect square with 1kHz and 2V) I only missed original CD or something with software, but it was easy for me to found it in internet. Thanks for fast delivery.

    Comments (1)
  • 2014-08-20 12:08:50

    I got this unit which offers you great capabilities for a very fair price. Probes are included as is the software. At http://www.eevblog.com/forum/testgear/hantek-6022be-20mhz-usb-dso this unit is widely discussed and even an improved version of the software is available for download (called "Open6022BE"). Also hardware mod's are suggested there. All in all a usefull piece of equipment and good value for money. You might also check my blog at http://keptenkurk.wordpress.com/2014/08/12/hantek-6022

    Comments
  • 2015-10-31 16:06:59

    I work with high end oscilloscopes at work, and wanted a scope at home for troubleshooting audio devices and some DIY projects. Hantec 6022 is perfect for this job. The device comes with 2 x1/x10 probes As the max input voltage of the device is 5v, and high power audio amps deliver more than 50V, I will need to buy an extra x100 probe to be able to do measurements on the amps at full power.

    Comments
Show:

    Go to page

    Go

    You might be interested in

    recommendation for you
    • £49.59
    • £177.46
    • £56.57
    • £106.95
    • £161.96
    • £61.22
    • £53.47
    • £3.25
    • £165.06
    • £3.56
    • £41.07
    • £10.84
    • £67.42
    • £11.62
    • £35.64
    • £15.49
    • £14.72
    • £244.89