High Power 10W Infrared IR 840-850nm SMD LED Chip Light Lamp DIY 4.5-5V
A part of the review has been auto-translated.
https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series
Nice Night Fly FPV Mod! Needs A large heat sink!!!
This is from a nest camera. No light at all. I tried using led drivers but this led killed 3 of them. Had to settle for a 10w 8.2 ohm resister. Run time 3 to 5 min. They get really hot. Nice fit inside a Milwaukee m12 flashlight.
Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out
Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W
According to the announcement
According to the announcement
ok
Produit conforme état apparent neuf a tester ultérieurement prix très correct
Very bright LED, pay attention to the voltage! Optimal for night vision systems.