Customer Reviews

4.73 out of 5
See all 73 reviews
Write a Review
  • All Reviews (73)
  • Image (14)
  • Video (0)
  • All Star
    • All Star(73)
    • 5 Star(63)
    • 4 Star(5)
    • 3 Star(2)
    • 2 Star(1)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 24/11/2020

    First I want to say that delivery was fast: I received the product after 6 days and 1 hour (shipped from CZ to EU country). About the product: I rated it only 4 stars because it has a mechanical design flaw (check the attached images): the supply board it's mounted using only 2 screws - the orange rectangles - and one of those screws had the thread already damaged. No mounting point down - red square. With this design flaw it wouldn't pass a quality test that consists of "drop and vibrations test". I checked components soldering quality and was OK. The ground is present and the connections was OK. The current has an offset of -15 mA (in the second picture the green DM indicates the voltage (under it measured voltage history) / the red DM is current). Anyway I recommend it for small projects.

    Show Original
  • 22/12/2020

    Looks good, works well, easy to use. Only the audible alarm for overvoltage/overcurrent protection is a bit annoying.

    Comments (1)
    Show Original
  • 15/05/2021

    The included usb management software cannot be installed. Can i download it from somewhere?

    Show Original
  • 30/07/2020

    He arrived earlier than expected. That's what I wanted.

    Show Original
  • 15/05/2021

    The subject of the sale is a programmable digital, very small, light but at the same time powerful stabilized laboratory source of direct voltage, which should not be missing in the workshop of any electronics, amateur radio or DIY. Its heart is a switching power supply with high efficiency, replacing the classic transformer. A digital potentiometer is used for precise voltage and current setting. Use the M1-M4 buttons to select the preset you want to set. Use the V / A button to select voltage or current and set the desired values. After a few seconds, these are automatically saved under the selected preset. There is also a very practical On / Off button for immediate connection / disconnection of the output voltage at the power supply terminals without having to disconnect the entire power supply from the mains. Of course, the power button is also present. The red display is really extra large and, in addition to voltage and current, it also shows the real power consumption in Watts. In addition to these basic functions, we also have the OVP, OCP and Lock buttons, which block the potentiometer and the entire control panel against accidental, unwanted changes in values. At the bottom of the power connector, located on the rear panel, is a user-replaceable fuse. On the back there is also a USB connector and RS485 interface. Press the digital potentiometer to activate / deactivate the audible indication. The electronics of the device are mounted in a metal box provided with a solid coating.

    Show Original
  • 18/04/2022

    It looks nice over time it will show all good!

    Show Original
  • 23/04/2022

    the power supply has arrived, tested and everything is working normally for now.

    Show Original
  • 22/04/2022

    Well Packed. Working seems ok.

    Show Original
  • 19/01/2022

    thanks shop verry good

    Show Original
  • 29/09/2021

    Item as described. Thanks.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$72.99
    • US$108.82
    • US$16.19
    • US$74.99
    • US$93.99
    • US$127.22
    • US$7.19
    • US$15.54
    • US$12.24
    • US$17.99