Customer Reviews

4.86 out of 5
See all 28 reviews
Write a Review
  • All Reviews (28)
  • Image (8)
  • Video (0)
  • All Star
    • All Star(28)
    • 5 Star(27)
    • 4 Star(0)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 03/01/2020

    Totally worth it. It can engrave every material. Easy to install and use. I was unsure about 20w option, but it is suitable for both engrave and cut, too.

    Comments (2)
    Show Original
  • 07/12/2019

    Very valid and economical product. It's really good. The power also allows to engrave stones. It's good for cutting wood but also for engraving images, after some tests I got excellent results by setting the power to 26% and burning time to a minimum (01 ms, very fast). The software is very intuitive and easy to use. Among the ones I've tried, it's the best. The only negative aspect is the work area limited to 15x15 cm and cannot be increased. It would not be difficult to extend the rails, but it would also be necessary to intervene on the software and firmware, interventions that can only be done by the manufacturer. The vibration sensor that locks the laser in case of machine movements is very sensitive and sometimes it is better to exclude it. However, even if the laser is stopped by the vibration sensor there are no problems because it is enough to restart the laser to see it start again from the point where it was stopped. The temperature sensor is very useful to keep the laser under control, but even at full power and for jobs that have lasted even a full day the temperature has never exceeded 60 ° Celsius. So far it has given me no problem. The cooling fan is a bit noisy but this depends on its speed (15000 rpm) which allows efficient cooling and keeps the smoke away from the lens.

    Comments
    Show Original
  • 12/02/2020

    Gyors kiszállítás .. Elégedett vagyok

    Comments
    Show Original
  • 20/01/2020

    very fast cargo and perfest product. its working. 20w laser no strong like a 3.5 w. only cutting 1 mm mdf. but image engavur good.

    Comments (1)
    Show Original
  • 28/04/2020

    Absolutely love it ! Worth noting that’s it’s the Master 2 model and for MacOS one needs to use the wireless version of the app (also works with iPhone and iPad) as the USB version won’t work.

    Comments
    Show Original
  • 20/05/2021

    Tested- it works. Excellent!

    Comments
    Show Original
  • 18/03/2020

    Very good. Thank you

    Comments
    Show Original
  • 13/01/2020

    good engraver

    Comments
    Show Original
  • 01/01/2020

    usb cable doesn't work

    Comments
    Show Original
  • 24/11/2019

    Llegó mucho antes de lo esperado, en buen estado y funcionando muy bien, Se necesitan varias pasadas para que logre cortar usando el de 20W, pero aún así, la máquina es muy buena.

    Comments (2)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$570.99
    • US$869.00
    • US$888.88
    • US$1,299.99
    • US$699.99
    • US$269.99
    • US$294.99
    • US$439.99
    • US$479.00
    • US$629.00
    • US$454.99
    • US$239.00
    • US$209.99
    • US$699.99
    • US$399.00
    • US$369.00
    • US$599.00
    • US$83.99