Customer Reviews

4.88 out of 5
See all 359 reviews
Write a Review
  • All Reviews (359)
  • Image (44)
  • Video (0)
  • All Star
    • All Star(359)
    • 5 Star(328)
    • 4 Star(24)
    • 3 Star(5)
    • 2 Star(0)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 18/11/2019

    Motors look ok, but the supplied wiring had taken a kicking. Several portions of the wire show impact damage so severe that I can see the wires inside. I just hope this damage occurred before the wires were packaged with the motors.

    Comments
    Show Original
  • 24/08/2020

    seems ok, little concerned that they all came in plastic bags with no protection whatsoever which caused them to get dinged here and there. 2 of the cables were damaged need to get replacements. I'll test them as soon as my shield comes in see if they work ok.

    Comments
    Show Original
  • 17/11/2020

    The shipment took 15 days to be delivered and the engines came in perfect condition, one of them was peeled in a corner but very little. The only bad thing is that a connector was bent, as well as the wires that were some peeled or bent. the packaging of the motors might improve a bit so as not to compromise wires or the connector, but in general they look great the motors.

    Comments
    Show Original
  • 07/01/2019

    No identifying marks on the motor body, so no way to tell if the motors supplied match those ordered. Product ID's on packaging do not correlate to anything published on the product description. There are some battle scars on the body and mounting flanges which appear superficial and shouldn't affect performance. Mounting flange and overall dimensions are as described. Shaft is slightly longer (24mm) but flat face remains 18mm, potentially affecting pulley / coupling location relative to mounting flange. Wiring is completely different. Body is fitted with 6pin socket (description is hard-wired 4core cable). 4 core cable provided (approx 1m long) with 6pin & 4pin connectors terminated. Terminations do not match description. By testing, my winding pairs are Red-Green and Blue-Black, not as described. Connectors seem easy enough to rewire. Winding resistance (measured at the socket on the motor body) is 1.7ohms (+/-0.5ohms using my meter) which is out of spec (listed 1.4ohm +/-0.14ohm). Unable to accurately measure other properties. All 5 motors ordered were each tested and found to be as described in this review. I'll be connecting these up to my CNC controller as soon as i get a chance to identify any other issues. They otherwise seem to be fine, and i should be able to work around the issues listed above.

    Comments
    Show Original
  • 13/03/2022

    very good quality heavy metal....not tested yet

    Comments
    Show Original
  • 09/06/2019

    Seller did a good job packaging and shipping item in the expected time projection. This large stepper motor is compatible to provide drive to the glide axis kits or enhance / repair CNC or 3D printers. My use will be with a couple axis kits combined with use of 20x20 extrusion rails to make a plotter frame to experiment with. The logic will be using a previously bought CNC controller board.

    Comments
    Show Original
  • 10/03/2021

    The motor is working, despite some marks due to shipping with really poor packaging... No bubble rap or even a box, just a simple bag!

    Comments
    Show Original
  • 18/11/2019

    The wires for the stepper motors were damaged or cut off..

    Comments
    Show Original
  • 30/04/2019

    A termék rendben van jó minőségű.

    Comments
    Show Original
  • 23/04/2019

    lookes good. not checked out yet. no markings to indicate if correct model

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$6.26
    • US$14.69
    • US$8.39
    • US$90.29
    • US$2.51
    • US$8.39
    • US$8.09
    • US$7.34
    • US$53.99
    • US$4.19
    • US$379.00
    • US$2.09
    • US$46.99
    • US$39.99
    • US$2.82
    • US$300.00
    • US$459.00
    • US$140.40