Customer Reviews

4.91 out of 5
See all 23 reviews
Write a Review
  • All Reviews (23)
  • Image (6)
  • Video (0)
  • All Star
    • All Star(23)
    • 5 Star(22)
    • 4 Star(0)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 25/12/2020

    Perfect for Video drone

    Comments (2)
    Show Original
  • 14/06/2020

    Excellent dead cat design frame for the money. I have the titan original version of this so can compare. This measures slightly larger at 224mm, and only has 5mm thickness arms. There is a minimal and acceptation amount of flex on the frame when constructed. Seems good carbon. The hole spacing for the frames 8 mounts are slightly different as are the way the arms mount bolt spacings so parts not readily interchangeable. Unlike The titan, the arms are separate on this which has both advantage of more easy to replace (if ever they being available) and disadvantage of less rigidity. The printed plastic parts are OK and similar although the vtx mount looks very similar it unfortunately does not have the receiver mount tube hole seen on the original. Also not present with this butterfly, papilio version are the front and rear bumper guards. However weight is significantly less with this frame, I'm not using the digital vtx mount and without this it weights only 93g Inc foam landing pads. Amazing 😁 Just looking forward to receiving the other parts I need to finish this with now! Might be worth buying a spare frame kit just for parts incase the worst happens.. Overall, well worth getting for a prop free view 5" quadcopter build, though will only know once the bird has flown

    Comments (1)
    Show Original
  • 01/12/2020

    perfect prop free 5” frame 👍

    Show Original
  • 09/06/2020

    Nice quality, ready for dji fpv vtx, came with every 3d printet part, weight is spot on 105 gram Need a 20x20mm FC in the back or AIO 30x30mm FC as there is not space for a stack under DJI VTX. Or you can go Cadxx Vista in the back with 12cm Coax cable for the Camera and the 30x30mm FC in the middle In my picture i have cut off some of the standoff for 30x30mm, but the FC still presses on the 3d printet mount for the vtx

    Comments (1)
    Show Original
  • 19/11/2021

    no more propellers in the field of view, the flight characteristics are simply bomb. the frame is easy to build, i have added a few print parts

    Show Original
  • 26/11/2020

    Surprisingly easy to tune for a deadcat frame. Running with EMAX Eco 2306 and performs well. Note - frame sized for regular 22mm cams not the DJI 20mm cam so you will need to print TPU inserts to go between cam and frame.

    Show Original
  • 27/10/2020

    Excellent frame. Very light and accommodates well all electronic. It should see with 3D piece to fix the camera of the DJI Air Unit, because the carbon part that accompanies the frame does not fit for camera Dji.

    Show Original
  • 03/04/2021

    arrived early

    Show Original
  • 13/04/2021

    seems good. will have to test.

    Show Original
  • 01/12/2021

    good frame and easy to assemble !

    Show Original

    Total 0 pages

    Go to page

    recommendation for you
    • US$80.94
    • US$22.04
    • US$1,155.87
    • US$30.07
    • US$20.99
    • US$40.94
    • US$46.19
    • US$103.94
    • US$161.99
    • US$18.29
    • US$11.50
    • US$4.99
    • US$5.24
    • US$5.24
    • US$19.05
    • US$5.34
    • US$57.99
    • US$5.24