Look like a kind of stretched X, once assembled the quad looks great. The carbon is 4mm on the bottom plate and not super stiff, there is a little flex on mine, perhaps is either the carbon used or the fact the arms are narrow, which will be good in flight, less frag is always good. The top plate is 2mm thick and very stiff. I lowered the top deck about 6mm by using shorter standoffs and lowering the top parts of camera plates. this made fittinf the Runcam Micro Swift2 a tight fit up top so bear this in mind if you do something like this. I have also trimmed the top plate frontal opening for the camera to suit the micro swift lens angle better. Gave all of the frame edges a good sanding (careful with the dust) and sealed the edges with thin cyano glue. I'm using Emax 1306 -3300kv and 3" props, and AIO racestar 30A, not flown yet but looks great and I reckon it will be a great flier.

Look like a kind of stretched X, once assembled the quad looks great. The carbon is 4mm on the bottom plate and not super stiff, there is a little flex on mine, perhaps is either the carbon used or the fact the arms are narrow, which will be good in flight, less frag is always good. The top plate is 2mm thick and very stiff. I lowered the top deck about 6mm by using shorter standoffs and lowering the top parts of camera plates. this made fittinf the Runcam Micro Swift2 a tight fit up top so bear this in mind if you do something like this. I have also trimmed the top plate frontal opening for the camera to suit the micro swift lens angle better. Gave all of the frame edges a good sanding (careful with the dust) and sealed the edges with thin cyano glue. I'm using Emax 1306 -3300kv and 3" props, and AIO racestar 30A, not flown yet but looks great and I reckon it will be a great flier.

Look like a kind of stretched X, once assembled the quad looks great. The carbon is 4mm on the bottom plate and not super stiff, there is a little flex on mine, perhaps is either the carbon used or the fact the arms are narrow, which will be good in flight, less frag is always good. The top plate is 2mm thick and very stiff. I lowered the top deck about 6mm by using shorter standoffs and lowering the top parts of camera plates. this made fittinf the Runcam Micro Swift2 a tight fit up top so bear this in mind if you do something like this. I have also trimmed the top plate frontal opening for the camera to suit the micro swift lens angle better. Gave all of the frame edges a good sanding (careful with the dust) and sealed the edges with thin cyano glue. I'm using Emax 1306 -3300kv and 3" props, and AIO racestar 30A, not flown yet but looks great and I reckon it will be a great flier.

so I have bought it for a replacement on my x140 furibee drone, and this frame and the belonging stuffs are amazing huge pack. you got everything you could need for a frame replacement. the only one bad thing is the strap a bit old, so every deattach time falls out some little stuff from it.

so I have bought it for a replacement on my x140 furibee drone, and this frame and the belonging stuffs are amazing huge pack. you got everything you could need for a frame replacement. the only one bad thing is the strap a bit old, so every deattach time falls out some little stuff from it.

so I have bought it for a replacement on my x140 furibee drone, and this frame and the belonging stuffs are amazing huge pack. you got everything you could need for a frame replacement. the only one bad thing is the strap a bit old, so every deattach time falls out some little stuff from it.

it’s my second buying of this one, because it’s the best option for me in 3” frame category. the first one kept working for a year, and only after that period started the arm bending. it has plenty of space between the top and bottom, the 4 mm bottom plate is rock solid. the downside that you should drill the 20*20 stack holes because it’s 30*30. And the top plate is also a bit long, so it’s time to cut off a 5 mm of the front of it, because if you not, than it’s in the camera image.

it’s my second buying of this one, because it’s the best option for me in 3” frame category. the first one kept working for a year, and only after that period started the arm bending. it has plenty of space between the top and bottom, the 4 mm bottom plate is rock solid. the downside that you should drill the 20*20 stack holes because it’s 30*30. And the top plate is also a bit long, so it’s time to cut off a 5 mm of the front of it, because if you not, than it’s in the camera image.

it’s my second buying of this one, because it’s the best option for me in 3” frame category. the first one kept working for a year, and only after that period started the arm bending. it has plenty of space between the top and bottom, the 4 mm bottom plate is rock solid. the downside that you should drill the 20*20 stack holes because it’s 30*30. And the top plate is also a bit long, so it’s time to cut off a 5 mm of the front of it, because if you not, than it’s in the camera image.

Buen chasis, le he montado un esc y fc 30x30 esc racestar rev35 mas omnibus f4 mas speedybee, corre más que una pelusa ya lo tngo montado, aguanta baterias de 1500 y 850mah 4s es un blackbird del copon.

Buen chasis, le he montado un esc y fc 30x30 esc racestar rev35 mas omnibus f4 mas speedybee, corre más que una pelusa ya lo tngo montado, aguanta baterias de 1500 y 850mah 4s es un blackbird del copon.

Buen chasis, le he montado un esc y fc 30x30 esc racestar rev35 mas omnibus f4 mas speedybee, corre más que una pelusa ya lo tngo montado, aguanta baterias de 1500 y 850mah 4s es un blackbird del copon.

The frame is ok. Have problems to fit camera, but solved it.

The frame is ok. Have problems to fit camera, but solved it.

The frame is ok. Have problems to fit camera, but solved it.

mini drone very good frame. pdb included price and set is ok

mini drone very good frame. pdb included price and set is ok

mini drone very good frame. pdb included price and set is ok

great frame, super strong, i use 1306 motors on 4S, the X style frame adds extra attitude on tight cornering i love it. Makes for a tight build, i had to modify the top plate to fit the VTX antenna but i dont find mods to be a negative in this case as my VTX is connected the top board. All in all i'm happy.

great frame, super strong, i use 1306 motors on 4S, the X style frame adds extra attitude on tight cornering i love it. Makes for a tight build, i had to modify the top plate to fit the VTX antenna but i dont find mods to be a negative in this case as my VTX is connected the top board. All in all i'm happy.

great frame, super strong, i use 1306 motors on 4S, the X style frame adds extra attitude on tight cornering i love it. Makes for a tight build, i had to modify the top plate to fit the VTX antenna but i dont find mods to be a negative in this case as my VTX is connected the top board. All in all i'm happy.

Brilliant little frame plenty of room for the build and seems to withstand knocks well.

Brilliant little frame plenty of room for the build and seems to withstand knocks well.

Brilliant little frame plenty of room for the build and seems to withstand knocks well.

good frame. i thought the arms might be weak but they are not. parts are cut very nicely. comes with a battery strap and a p.d.b.landing pads and a battery box or protector.

good frame. i thought the arms might be weak but they are not. parts are cut very nicely. comes with a battery strap and a p.d.b.landing pads and a battery box or protector.

good frame. i thought the arms might be weak but they are not. parts are cut very nicely. comes with a battery strap and a p.d.b.landing pads and a battery box or protector.

Realacc Blackbird 140 frame with strong thin arms. arms 4 mm thick.

Realacc Blackbird 140 frame with strong thin arms. arms 4 mm thick.

Realacc Blackbird 140 frame with strong thin arms. arms 4 mm thick.