Customer Reviews

4.86 out of 5
Write a Review
  • All Reviews (21)
  • Image (7)
  • Video (0)
  • All Star
    • All Star(21)
    • 5 Star(18)
    • 4 Star(3)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
  • November-10 2020 04:52:58

    The Tenlog Hands 2 printer is the first 3D printer I owned and I couldn't be more impressed with it. It is mainly preassembled so its super easy to get up and running. There is a little bit of a learning curve to get it leveled and adjusted perfectly for dual printing, but once it is set correctly everthing goes well. I was hoping to print ABS and that the bed temp could go above 80C. It does and I've printed some great prints in both PLA and ABS. Sometimes the prints don't stick well to the glass

  • December-05 2020 04:11:39

    fast shipping, and easy installation. works fine with a pretty recent version of cura (4.4) Looks like factory tuned, only had to adjust the Y axis 0.25mm.

  • January-10 2021 06:40:27

    Bin begeistert. Drucker kam schnell und unbeschädigt an. 1/2 Stunde aufgebaut und losgedruckt. Ich muss sagen, bisher mein bester 3D Drucker. Durch den DirektExtruder, lassen sich auch sehr gut TPU und TPE und andere FlexFilamente drucken. Was andere schreiben, " Das die Druckplatte nicht grade wäre, kann ich nicht bestätigen. Drucker lässt sich hervorragend leveln. Slotcar mit 0,1mm Layer, siehe Bild.

  • February-13 2020 15:05:26

    Nice well made printer. Impressed with electrical cable routing and tidiness of wiring.First test print ok no tweak to parameters or belt tensioning.

    Comments (1)
  • September-23 2020 10:28:56

    Стекло можно было бы в пузырчатую плёнку упаковать.

    August-08 2020 11:03:46

    very good

  • January-20 2020 00:55:26

    キャンペーンで4万円くらいで購入しましたが、デュアルヘッド機でこの価格は買いです。 2.3点注意事項があります。 配送  注文後5日くらいで佐川急便で届きました。 組み立て  ほとんど組みあがった状態でした。  本体にねじを4か所、フィラメントセット部分にねじを4か所、ヘッドを取り付けるのにねじを4本×2  あとは配線だけです。 電源ケーブル  付

  • November-23 2020 02:00:58

    There are relatively few IDEX printers on the market, especially at this price mark, so for what you pay, this is an excellent machine. The print quality is great, the user interface is straightforward and the printer is sturdy. However, there are some things to be aware of. Firstly, the version sold by Banggood is not the latest as described on the Tenlog website; specifically, it lacks filament runout sensors (despite this being shown on the label on the printer), & does not have the power

    Comments (1)
  • January-17 2021 15:12:24

    Eine Woche nach Bestellung geliefert. Sehr gut verpackt in zähem Kunststoffschaum. Drucker ist vormontiert. Restliche Montage ist mit beigelegtem Werkzeug ohne Vorkenntnisse rasch erledigt. Mit dem beigepackten Filament (2 Spulen Filament à 200 g) kann auch gleich mit den Tests begonnen werden. Software und ausführliche Beschreibungen für die Einstellungen befinden sich auf einer ebenfalls beigelegten Speicherkarte. Mittlerweile habe ich die letzten Firmware - Updates von der TENLOG - Seite heruntergeladen

  • October-26 2020 12:22:32

    The printer is very good! The best I've had so far, original from the factory. The usability of the display is also good, but something bigger would be even better. Entering the values via the display is a bit tricky. My machine still has the loud drivers in it, but they are replaceable drivers which is great. When the printer is not working it is as quiet as if it were off, only the lights tell you that it is on. The display can also be set so that it switches off after a while. Unfortunately, the

    Comments (1)

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • £222.99
    • £148.66
    • £445.26
    • £400.66
    • £296.59
    • £556.76
    • £408.09
    • £282.46
    • £208.13
    • £281.73
    • £163.53
    • £691.30
    • £247.53
    • £497.30
    • £74.33
    • £200.69
    • £237.86
    • £148.66