3D printer claim Hello, I received the cardboard machine in good condition and the interior also I thank you. On the other hand I found 2 defects. - I have 1 of the 2 printing cooling fan that does not turn yet it is well connected and powered (at the voltmeter red wire on red wire I find -24v maybe it is welded upside down or defective). - then the z offset procedure just after the automatic levelling is not good(after the automatic levelling of the plate value z offset:-7,670 the head was still too high I went down as advised on the procedure with a sheet of paper value z offset-31,560) and during the first printing (the finger on the power button I did not have time to stop it the head damaged the tray on a few centimeters 😢 see photo) after manual adjustment value z offset-1,530

Réclamation imprimante 3D Bonjour, j’ai bien reçu la machine carton en bonne état et l’intérieur aussi je vous en remercie. Par contre j’ai constaté 2 défauts. - j’ai 1 des 2 ventilateur de refroidissement d’impression qui ne tourne pas pourtant il est bien branché et alimenté (au voltmètre fil rouge + sur fil rouge je trouve -24v peut-être est-il soudé à l’envers ou défectueux). - ensuite la procédure z offset juste après le nivellement automatique n’est pas bonne ( après nivellement automatique du plateau valeur z offset: -7,670 la tête était encore trop haute j’ai descendu comme conseillé sur la procédure avec une feuille de papier valeur z offset -31,560 ) et lors de la première impression ( le doigt sur le bouton power je n’ai pas eu le temps de l’arrêter la tête a abîmé le plateau sur quelques centimètres 😢 voir photo)après réglage manuel valeur z offset -1,530

3D printer claim Hello, I received the cardboard machine in good condition and the interior also I thank you. On the other hand I found 2 defects. - I have 1 of the 2 printing cooling fan that does not turn yet it is well connected and powered (at the voltmeter red wire on red wire I find -24v maybe it is welded upside down or defective). - then the z offset procedure just after the automatic levelling is not good(after the automatic levelling of the plate value z offset:-7,670 the head was still too high I went down as advised on the procedure with a sheet of paper value z offset-31,560) and during the first printing (the finger on the power button I did not have time to stop it the head damaged the tray on a few centimeters 😢 see photo) after manual adjustment value z offset-1,530

Arrived and I am already using, very good quality

chegou e já estou usando, muito boa qualidade

Arrived and I am already using, very good quality

Very good printer, would recommend but the box came battered and with two tears.

Impreasora muito boa, recomendo, mas a caixa veio batida e com dois rasgos.

Very good printer, would recommend but the box came battered and with two tears.

Quick delivery, 25 days from purchase to home delivery.

entrega rápida, 25 dias da compra até a entrega em casa.

Quick delivery, 25 days from purchase to home delivery.

Very good the printer! Arrived in about 40 days, with the box tightly packed. The quality of the material is impressive. Very simple assembly and everything seems to be working normally. This week I'll be running more tests.

muito boa a impressora! Chegou em cerca de 40 dias, com a caixa bem embalada. A qualidade do material é impressionante. Montagem muito simples e tudo parece estar funcionando normalmente. Essa semana irei fazer mais testes.

Very good the printer! Arrived in about 40 days, with the box tightly packed. The quality of the material is impressive. Very simple assembly and everything seems to be working normally. This week I'll be running more tests.

According to the ad, it arrived with the package intact.

Conforme o anúncio, chegou com a embalagem intacta.

According to the ad, it arrived with the package intact.

Wonderful printer and for the price you get a lot. So i got two :)

Wonderful printer and for the price you get a lot. So i got two :)

Wonderful printer and for the price you get a lot. So i got two :)

came with the wrong plug, the fan ramps up to full speed and wont turn off with the firmware control, the display came discentralized, haven't tried to print yet.

came with the wrong plug, the fan ramps up to full speed and wont turn off with the firmware control, the display came discentralized, haven't tried to print yet.

came with the wrong plug, the fan ramps up to full speed and wont turn off with the firmware control, the display came discentralized, haven't tried to print yet.

Good printer. Pleasant volume and good adhesion through the magnetic plate. Pressure bed was very loose with me, but it can be adjusted well. very good value for money

Guter Drucker. Angenehme Lautstärke und gute Haftung durch die Magnetplatte. Druckbett war bei mir allerdings sehr locker, aber lässt sich gut einstellen. sehr gutes Preis-Leistungs Verhältnis

Good printer. Pleasant volume and good adhesion through the magnetic plate. Pressure bed was very loose with me, but it can be adjusted well. very good value for money

Arrived in 29 days Printer working 100%, great prints

chegou em 29 dias impressora funcionando 100%, ótimas impressões

Arrived in 29 days Printer working 100%, great prints