18.04.2021 tarihinde ödemesini yaptım, 29.04.2021 tarihinde, T.SK105A.03 modeli teslim edildi. Ekran çözünürlüğüne uygun yazılımı yükleyerek sorunsuz şekilde çalıştırdım. Kullandığım monitörün markası Samsung olduğu için çok iyi görüntü aldım. Ekran modelinizi tespit ettikten sonra çalışma voltajını, çözünürlük bilgilerini ve ekran girişinizin kaç pin olduğunu panelook.com adresinden öğrenmelisiniz. Bu sayede hatalı sipariş vermezsiniz. Ürün açıklamasını dikkatlice incelerseniz hata yapma ihtimaliniz kalmaz.

18.04.2021 tarihinde ödemesini yaptım, 29.04.2021 tarihinde, T.SK105A.03 modeli teslim edildi. Ekran çözünürlüğüne uygun yazılımı yükleyerek sorunsuz şekilde çalıştırdım. Kullandığım monitörün markası Samsung olduğu için çok iyi görüntü aldım. Ekran modelinizi tespit ettikten sonra çalışma voltajını, çözünürlük bilgilerini ve ekran girişinizin kaç pin olduğunu panelook.com adresinden öğrenmelisiniz. Bu sayede hatalı sipariş vermezsiniz. Ürün açıklamasını dikkatlice incelerseniz hata yapma ihtimaliniz kalmaz.

18.04.2021 tarihinde ödemesini yaptım, 29.04.2021 tarihinde, T.SK105A.03 modeli teslim edildi. Ekran çözünürlüğüne uygun yazılımı yükleyerek sorunsuz şekilde çalıştırdım. Kullandığım monitörün markası Samsung olduğu için çok iyi görüntü aldım. Ekran modelinizi tespit ettikten sonra çalışma voltajını, çözünürlük bilgilerini ve ekran girişinizin kaç pin olduğunu panelook.com adresinden öğrenmelisiniz. Bu sayede hatalı sipariş vermezsiniz. Ürün açıklamasını dikkatlice incelerseniz hata yapma ihtimaliniz kalmaz.

All fine working without problem. My LCD panel 15.4 "1280x800px 60Hz LCM 30-pin LVDS (1ch 6bit) 3.3V (CLAA154WA01AQ) from Fujitsu L1310g laptop. No modification needed. Only flashed CPS6_19028152_RX_V53_03_A1_IR_XY_AP_M90_PNL_B154EW08_V0_1280_800_4MB file . Analog TV not available in our region anymore. HDMI input and USB mp4 player tested. Sound and video no issues.

All fine working without problem. My LCD panel 15.4 "1280x800px 60Hz LCM 30-pin LVDS (1ch 6bit) 3.3V (CLAA154WA01AQ) from Fujitsu L1310g laptop. No modification needed. Only flashed CPS6_19028152_RX_V53_03_A1_IR_XY_AP_M90_PNL_B154EW08_V0_1280_800_4MB file . Analog TV not available in our region anymore. HDMI input and USB mp4 player tested. Sound and video no issues.

All fine working without problem. My LCD panel 15.4 "1280x800px 60Hz LCM 30-pin LVDS (1ch 6bit) 3.3V (CLAA154WA01AQ) from Fujitsu L1310g laptop. No modification needed. Only flashed CPS6_19028152_RX_V53_03_A1_IR_XY_AP_M90_PNL_B154EW08_V0_1280_800_4MB file . Analog TV not available in our region anymore. HDMI input and USB mp4 player tested. Sound and video no issues.

the led wasnt blinking because I didn't load the right software and it seems that many people is struggling with this issue. I also bought another usb 2.0 thinking that was the issue but I was wrong. the image is so clear my screen resolution is 1280x800 and I can play mp4 at 720p looks great. the only thing I haven't figured out is the brightness and I know I'll make it brighter using the hidden menu which is menu+1147.

the led wasnt blinking because I didn't load the right software and it seems that many people is struggling with this issue. I also bought another usb 2.0 thinking that was the issue but I was wrong. the image is so clear my screen resolution is 1280x800 and I can play mp4 at 720p looks great. the only thing I haven't figured out is the brightness and I know I'll make it brighter using the hidden menu which is menu+1147.

the led wasnt blinking because I didn't load the right software and it seems that many people is struggling with this issue. I also bought another usb 2.0 thinking that was the issue but I was wrong. the image is so clear my screen resolution is 1280x800 and I can play mp4 at 720p looks great. the only thing I haven't figured out is the brightness and I know I'll make it brighter using the hidden menu which is menu+1147.

Hello everyone, I would like to share my experience with this product that I used to replace the mainboard of one of my old led TV that I'm currently using as secondary monitor. I suggest to follow the instruction to assure the compatibility with your panel, I don't know if the provided cable is compatible with my panel, because I used the old one . Another thins that could help some is that I used my led inverter instead of the provided one, just check that your is pin to pin compatible with the board (check VCC and GND and Enable pins position(. The boards come with a factory software that was not compatible with my panel but I just used the VST53C_4MB_M.bin for my resolution, I noticed that the vendor developed specific software version for specific panel, so I suggest to check if there's a version for your panel before using the general. I was able to place all provided things inside the tv case and I like the results (you can judge, just check the uploaded photo). The job was not complicated but I checked pinout, compatibility and other stuffs a lot of time before that I decide to powered on my board, I think that if you will choose wrong panel VCC on pinout you can damage both board and panel so be careful!!! According to the audio IC datasheet I decided to leave disconnected the original audio speaker because both electrical power and impedance were not compatible (6W@4ohm for channel) , the provided IC is only 2ch for 2W@3ohm. I kindly suggest this kit if you need a cheap monitor or CCTV. I also suggest to read careful the provided manual just to prevent any damage on stuff or person. Unfortunately I have to highlight that I had some issues with shipment (the local courier delayed the delivery and bangood support cannot help me as I expected, Bangood please improve your support on after sales issue that will prevent any bad expirence), but finally after a lot of phone call I guessed the courier and I found my board. Hope this can help you guys!

Hello everyone, I would like to share my experience with this product that I used to replace the mainboard of one of my old led TV that I'm currently using as secondary monitor. I suggest to follow the instruction to assure the compatibility with your panel, I don't know if the provided cable is compatible with my panel, because I used the old one . Another thins that could help some is that I used my led inverter instead of the provided one, just check that your is pin to pin compatible with the board (check VCC and GND and Enable pins position(. The boards come with a factory software that was not compatible with my panel but I just used the VST53C_4MB_M.bin for my resolution, I noticed that the vendor developed specific software version for specific panel, so I suggest to check if there's a version for your panel before using the general. I was able to place all provided things inside the tv case and I like the results (you can judge, just check the uploaded photo). The job was not complicated but I checked pinout, compatibility and other stuffs a lot of time before that I decide to powered on my board, I think that if you will choose wrong panel VCC on pinout you can damage both board and panel so be careful!!! According to the audio IC datasheet I decided to leave disconnected the original audio speaker because both electrical power and impedance were not compatible (6W@4ohm for channel) , the provided IC is only 2ch for 2W@3ohm. I kindly suggest this kit if you need a cheap monitor or CCTV. I also suggest to read careful the provided manual just to prevent any damage on stuff or person. Unfortunately I have to highlight that I had some issues with shipment (the local courier delayed the delivery and bangood support cannot help me as I expected, Bangood please improve your support on after sales issue that will prevent any bad expirence), but finally after a lot of phone call I guessed the courier and I found my board. Hope this can help you guys!

Hello everyone, I would like to share my experience with this product that I used to replace the mainboard of one of my old led TV that I'm currently using as secondary monitor. I suggest to follow the instruction to assure the compatibility with your panel, I don't know if the provided cable is compatible with my panel, because I used the old one . Another thins that could help some is that I used my led inverter instead of the provided one, just check that your is pin to pin compatible with the board (check VCC and GND and Enable pins position(. The boards come with a factory software that was not compatible with my panel but I just used the VST53C_4MB_M.bin for my resolution, I noticed that the vendor developed specific software version for specific panel, so I suggest to check if there's a version for your panel before using the general. I was able to place all provided things inside the tv case and I like the results (you can judge, just check the uploaded photo). The job was not complicated but I checked pinout, compatibility and other stuffs a lot of time before that I decide to powered on my board, I think that if you will choose wrong panel VCC on pinout you can damage both board and panel so be careful!!! According to the audio IC datasheet I decided to leave disconnected the original audio speaker because both electrical power and impedance were not compatible (6W@4ohm for channel) , the provided IC is only 2ch for 2W@3ohm. I kindly suggest this kit if you need a cheap monitor or CCTV. I also suggest to read careful the provided manual just to prevent any damage on stuff or person. Unfortunately I have to highlight that I had some issues with shipment (the local courier delayed the delivery and bangood support cannot help me as I expected, Bangood please improve your support on after sales issue that will prevent any bad expirence), but finally after a lot of phone call I guessed the courier and I found my board. Hope this can help you guys!

everything is ok!this is my second sender it took a little longer but it was worth waiting obviously postnil has a problem with shipments because COVID19 will have all the recommendations thanks banggood!

sve je ok !ovo je moja druga posiljka malo je duze trebalo ali vrijedilo je sacekati ocito postnil ima problem sa posiljkama zbog covid19 imace sve preporuke hvala banggood!

everything is ok!this is my second sender it took a little longer but it was worth waiting obviously postnil has a problem with shipments because COVID19 will have all the recommendations thanks banggood!

Hello, I received the product after one month. It was well packaged and I have no breakage. For installation, just follow the instructions on BG and everything will be fine. I am very happy to have been able to buy this product which meets all my expectations at a very good price. I was able to recycle an old computer screen, which was lying around at home, as a screen for my PI. Thank you

Hello, I received the product after one month. It was well packaged and I have no breakage. For installation, just follow the instructions on BG and everything will be fine. I am very happy to have been able to buy this product which meets all my expectations at a very good price. I was able to recycle an old computer screen, which was lying around at home, as a screen for my PI. Thank you

Hello, I received the product after one month. It was well packaged and I have no breakage. For installation, just follow the instructions on BG and everything will be fine. I am very happy to have been able to buy this product which meets all my expectations at a very good price. I was able to recycle an old computer screen, which was lying around at home, as a screen for my PI. Thank you

I got the T.SK105A.03 board and tried it with two 1280x800 resolution panels which are Chunghwa CLAA154WA05AN and LG-Philips LP154W01-TLD4. Upgraded to the latest firmware (20201223_230526). Service menu is triggered with MENU+1147 combination. With default configuration the screen was flickering and colors were defect. From the service menu I had to change Panel settings to get correct view. I got the best results with the following LVDS parameters; Swing Data: 0 Swing CLK: 15 Type For CPS: 6 MAP: JEIDA Color Depth: 6 bit CLAA154WA05AN panel worked seamlessly. But, when I have tried with LP154W01 panel, there was a significant flickering. I have discovered that playing with EMC settings I was able to reduce flickering but the problem was still there. EMC settings I have used: DRAM SSC: 0% DRAM Span: 16.6K LVDS SSC: -3.5% LVDS Span: 16.6K Thus, I have concluded it was not possible to fix the problem by changing parameters from the service menu. When I touch or move the lvds cable, flickering on the screen was changing, so the problem was physical. In the Q&A part, people mostly say to buy the correct lvds cable for similar problems. Both panels are 1ch 6-bit. But the cable that comes with the package is 2ch 6-bit, so I have removed unused second channel pins (according to panel datasheet and comparing 1ch and 2ch cable pictures from the Banggood product pages) from the connector, and bingo! There is no more flickering. I guess the unused pins were causing extra interference. You can see details in the pictures. This way you can easily convert a 2ch cable to a 1ch cable. HDMI works normally. We still have some analog channels on our CATV line here and analog TV performance is pretty good. Sound is clear on earphone output. Channel list and some other settings can be backed up to the flash disk or imported vice versa using the service menu. Remote control is full size and useful. IR signal reception is strong, remote control is easily detected from different angels.

I got the T.SK105A.03 board and tried it with two 1280x800 resolution panels which are Chunghwa CLAA154WA05AN and LG-Philips LP154W01-TLD4. Upgraded to the latest firmware (20201223_230526). Service menu is triggered with MENU+1147 combination. With default configuration the screen was flickering and colors were defect. From the service menu I had to change Panel settings to get correct view. I got the best results with the following LVDS parameters; Swing Data: 0 Swing CLK: 15 Type For CPS: 6 MAP: JEIDA Color Depth: 6 bit CLAA154WA05AN panel worked seamlessly. But, when I have tried with LP154W01 panel, there was a significant flickering. I have discovered that playing with EMC settings I was able to reduce flickering but the problem was still there. EMC settings I have used: DRAM SSC: 0% DRAM Span: 16.6K LVDS SSC: -3.5% LVDS Span: 16.6K Thus, I have concluded it was not possible to fix the problem by changing parameters from the service menu. When I touch or move the lvds cable, flickering on the screen was changing, so the problem was physical. In the Q&A part, people mostly say to buy the correct lvds cable for similar problems. Both panels are 1ch 6-bit. But the cable that comes with the package is 2ch 6-bit, so I have removed unused second channel pins (according to panel datasheet and comparing 1ch and 2ch cable pictures from the Banggood product pages) from the connector, and bingo! There is no more flickering. I guess the unused pins were causing extra interference. You can see details in the pictures. This way you can easily convert a 2ch cable to a 1ch cable. HDMI works normally. We still have some analog channels on our CATV line here and analog TV performance is pretty good. Sound is clear on earphone output. Channel list and some other settings can be backed up to the flash disk or imported vice versa using the service menu. Remote control is full size and useful. IR signal reception is strong, remote control is easily detected from different angels.

I got the T.SK105A.03 board and tried it with two 1280x800 resolution panels which are Chunghwa CLAA154WA05AN and LG-Philips LP154W01-TLD4. Upgraded to the latest firmware (20201223_230526). Service menu is triggered with MENU+1147 combination. With default configuration the screen was flickering and colors were defect. From the service menu I had to change Panel settings to get correct view. I got the best results with the following LVDS parameters; Swing Data: 0 Swing CLK: 15 Type For CPS: 6 MAP: JEIDA Color Depth: 6 bit CLAA154WA05AN panel worked seamlessly. But, when I have tried with LP154W01 panel, there was a significant flickering. I have discovered that playing with EMC settings I was able to reduce flickering but the problem was still there. EMC settings I have used: DRAM SSC: 0% DRAM Span: 16.6K LVDS SSC: -3.5% LVDS Span: 16.6K Thus, I have concluded it was not possible to fix the problem by changing parameters from the service menu. When I touch or move the lvds cable, flickering on the screen was changing, so the problem was physical. In the Q&A part, people mostly say to buy the correct lvds cable for similar problems. Both panels are 1ch 6-bit. But the cable that comes with the package is 2ch 6-bit, so I have removed unused second channel pins (according to panel datasheet and comparing 1ch and 2ch cable pictures from the Banggood product pages) from the connector, and bingo! There is no more flickering. I guess the unused pins were causing extra interference. You can see details in the pictures. This way you can easily convert a 2ch cable to a 1ch cable. HDMI works normally. We still have some analog channels on our CATV line here and analog TV performance is pretty good. Sound is clear on earphone output. Channel list and some other settings can be backed up to the flash disk or imported vice versa using the service menu. Remote control is full size and useful. IR signal reception is strong, remote control is easily detected from different angels.

It worked well partially. I plugged it into my B170PW03 screen and it displays the picture and turns on fine. But when selecting AV, PC or Media inputs the screen is shown double and divided in half. However with the ATV input it does show the full screen. I am waiting for the help of the after sales team. However, it is a recommended item despite everything

It worked well partially. I plugged it into my B170PW03 screen and it displays the picture and turns on fine. But when selecting AV, PC or Media inputs the screen is shown double and divided in half. However with the ATV input it does show the full screen. I am waiting for the help of the after sales team. However, it is a recommended item despite everything

It worked well partially. I plugged it into my B170PW03 screen and it displays the picture and turns on fine. But when selecting AV, PC or Media inputs the screen is shown double and divided in half. However with the ATV input it does show the full screen. I am waiting for the help of the after sales team. However, it is a recommended item despite everything

I ordered this kit for LTN170WX-L05 but it appears set to 8 bit and does not allow me to change to 6 bit, can you tell me how to do it?? I have updated firmware (VST53C_4MB_M.bin from 1440x900 instead of SKR8503_100.bin since it does NOT support it, it tells me that there is no firmware in the usb) and still does not allow me to switch to 6 bit. Please thank you for your advice as soon as possible. Thanks a thousand.

Pedi este kit para LTN170WX-L05 pero me aparece configurado a 8 bit y no me permite el cambio a 6 bit, pueden indicarme como lo hago?? He actualizado firmware (VST53C_4MB_M.bin de 1440x900, en vez de SKR8503_100.bin ya que NO lo admite, me dice que no hay firmware em el usb) y sigue sin permitirme cambiar a 6 bit. Por favor, agradecere lo antes posible sus indicaciones. Gracias mil.

I ordered this kit for LTN170WX-L05 but it appears set to 8 bit and does not allow me to change to 6 bit, can you tell me how to do it?? I have updated firmware (VST53C_4MB_M.bin from 1440x900 instead of SKR8503_100.bin since it does NOT support it, it tells me that there is no firmware in the usb) and still does not allow me to switch to 6 bit. Please thank you for your advice as soon as possible. Thanks a thousand.

OK 8789215018

OK 8789215018

OK 8789215018