rs4
Q: compatible with lithium or lifepo4 battery?
Asked by Ferdinand on 2021-12-26 09:40:51
rs4 theoretically you can load lithium batteries but I do not recommend you to do it with this device because there is no setup where you can set the type of battery. You need additional load control corresponding to the load characteristic of your lithium batteries.
2021-12-26 12:53:29 Helpful (0)Q: Please provide the actual zoom measurement?
Asked by BG216143754 on 2021-10-24 11:54:44
rs4 10 - 30x zoom. This is compared with my PTZ camera and the magnification of them is very close.
2021-10-25 11:37:09 Helpful (0)Q: what about quantity is ther only one or all the cameras as shown in photos
Asked by Bhushan Vanjiwale on 2021-10-10 11:37:04
rs4 you can make your choice when you click on one of the items and can see there is a different price. So each camera module is a separated offer. The quality of the camera modules depends on there specifications and is well documented in the the product page.
2021-10-10 01:27:09 Helpful (0)Q: Can this be used with Raspberry 3?
Asked by tselios on 2021-09-17 07:54:11
rs4 yes of course ... and it is nearly the same way as with an arduino or other devices. Please make sure you add the 10 KΩ pull-up resistor between the 3.3 V and data line. The Adafruit Python DHT Sensor library makes interfacing the DHT22 easy.
2021-09-17 11:22:03 Helpful (1)Q: Does it come with filament?
Asked by BG172225493 on 2021-09-03 11:55:12
rs4 It comes with a few meters filament. In my case about 10m. You can print a few small testobjects.
2021-09-03 12:08:45 Helpful (0)Q: how can i make it so he only takes pictures and no videos
Asked by BG171538321 on 2021-08-23 01:26:55
rs4 you have to change the time.txt file. After date and time follows the work mode. For example the standard mode is 332Y. You have to change it to 132Y. Now the camera take only pictures.
2021-08-23 03:35:27 Helpful (1)Q: hello there is this good for sky watching ?
Asked by mccart on 2021-07-12 07:43:35
rs4 i do not recommend to use this Device for sky watching.
2021-07-13 03:04:48 Helpful (0)
rs4 Basically check all connections VCC, GND, Video and (Audio if cam has Audio). The camera have to be an analog one. You can change frequencies. Transmitter and Receiver needs 12V. Cams are variable from about 5 to 40V. Check also antenna connection.
2021-06-26 02:01:57 Helpful (0)
Q: what is the reference for the 5 pins connector behind the usb? where to buy those cables?
Asked by BG533324810 on 2021-03-29 07:42:00
rs4 This is the I2C connection to a sensor in this case a bme280. I think it is the Excellway® Mini Micro JST 2.0 PH 5Pin Connector Plug With 30cm Wires Cables --- you can search in this store.
2021-03-30 03:44:43 Helpful (0)Q: Why is it black and white even in broad daylight?
Asked by cf1990 on 2021-03-12 09:46:14
rs4 This camera is a very low cost product. Mine takes no pictures in the darkness. There are a lot of different issues with this camera. May be there are different components in some lots of production. It is not worth to make any further effort to solve something.. if you get some one that everything works you are the lucky one ....
2021-03-13 02:41:55 Helpful (2)
rs4 This is a wifi ip camera and you dont need a usb cable to connect it with your pc to get the live stream. The usb is only for power supply and programing. On your PC e.g. you need a wifi-stick and the ip-adress of the camera. On your PC search for the wifi signal of the cam and connect. (in the same way as on the android or ios phone) Tip the ip-adress in the browser and you will see the the live stream of the camera.
2021-03-01 04:19:12 Helpful (0)Q: it works with Raspberry 3 A ?
Asked by Pedro on 2021-02-22 10:29:08
rs4 Hi, you have a model 3 A+ and it will work. This model have a csi camera port where you can connect this camera. Basically the A models are for sensors and automating because they are designed for low current consumption.
2021-02-22 01:18:22 Helpful (0)
rs4 Hi, my device currently did not reach this mark of 10KWh, but I think it takes a while from 10KWh to 11KWh and then it will display 11 KWh........ the counter continious from 10 to 11 then 12 and so on... and shows no more commas.
2021-02-07 02:25:25 Helpful (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
