alexandergrimsmo
Q: How about the motor screws? I can't find any anywhere.
Asked by alexandergrimsmo on 2020-02-19 01:32:05
Q: Received in perfect condition. How do I connect the pins? Which pin is what?
Asked by bbob1987 on 2019-02-21 01:04:01
alexandergrimsmo With the arrow on the front of chip in the corner pointing Up and Left:Top Left = VDD 5V , Top Right = Data IN , Bottom Left = Data Out , Bottom Right = Gnd
2021-04-09 09:08:09 Helpful (1)
alexandergrimsmo It transmits whatever protocol the camera send. The VTX doesn't care if its NTSC or PAL
2021-02-11 04:23:35 Helpful (0)
alexandergrimsmo Should be alright. I assume most receivers can drive 4 PWM- ESC-inputs with one throttle-channel output.
2021-01-30 09:53:06 Helpful (0)
alexandergrimsmo It'sfine. I had to take off some material inside the cable-duct on the arms, but you can pull the cables thru with a stringl.
Q: is this vtx board for diatone drone?
Asked by svensoni08 on 2018-08-22 11:39:45
alexandergrimsmo It's a voltage regulator for the TBS Unify VTX. This is not a VTX
2021-01-05 10:10:27 Helpful (0)Q: what is the difference between ccw and cw?
Asked by Ciperocho on 2020-12-01 04:43:56
alexandergrimsmo 'turbine' blades are angled the other way, to blow cold air into the stator, one for clockwise rotation, the other for counterclockwise rotation.
2020-12-19 06:54:14 Helpful (1)Q: Looks fragile? What do you guys think?
Asked by MarcAntoine on 2020-04-14 11:51:59
alexandergrimsmo Feels really solid in the hands. I'm using this frame for my high-end builds, the best of the best, no expenses spared. And it's reasonably priced too!
2020-12-19 05:51:03 Helpful (0)Q: recommended motor for 7 inch model
Asked by rahulmahantesh2 on 2019-12-24 10:39:37
alexandergrimsmo 2807 - 2506 or thereabouts would be appropriate for 7". Around 1300KV - 1500KV on 4S - 6S. Depends what type of flying you intend on. Acro (big) or longrange (small and light).
2020-12-09 03:41:43 Helpful (0)Q: Hi, Can this cable connect an android box to a crt tv?
Asked by jjorgecunha on 2020-01-15 06:45:28
alexandergrimsmo It really take HDMI input and output to analogue RGB (scart type)??? I don't see any electronics at all on this cable, so how would it even work?
2020-12-04 05:41:06 Helpful (0)Q: Is the shade really plexiglass (plastic)? Or is that a misprint?
Asked by alexandergrimsmo on 2020-12-02 01:01:10
D3monan Glory I think it is plexiglass
2021-01-05 01:31:48 Helpful (0)
alexandergrimsmo It looks a lot like the Cockroach v2 frame, from summer 2019.
2020-12-02 03:53:47 Helpful (3)
alexandergrimsmo Obviously not for stacking. For electronic projects it is barely worth it. Actually really good, but expensive.
alexandergrimsmo It's 20 by 20 mount. The actual width is 30.5 by 29 something,.
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
Moutombo77 They sell only the frame
2022-02-12 03:09:03 Helpful (0)