weisy
weisy Module is 0.52 Module is Reference diameter divided by teeths, but this diameter is the outer diamter (21 T :12mm D) - the reference diameter is about 11mm - then 11 divided 21 = 0,5221 T: 12mm diameter 22 T: 12.5mm 23 T: 13mm 24 T: 13.5mm 25 T: 14mm
2021-01-10 10:17:11 Helpful (2)Q: Is yaxun 878d + compatible?
Asked by toshiba1987 on 2020-12-21 03:13:40
weisy i think yes.
2020-12-23 06:32:45 Helpful (0)
weisy alittle soap, and the toothbrush is better if is hard, not shoft.
2020-12-23 06:30:02 Helpful (0)
Q: Voltage for charging? 5v? and amperage(A)?
Asked by weisy on 2020-11-20 01:40:44
The seller USB 5V.
2020-11-27 03:48:11 Helpful (0)Q: Hi! does the pinions fit with the original drive of ZD Racing 9106s?
Asked by skay10 on 2020-02-04 04:01:18
weisy i can't say, is better you ask to support, or buy the original spare for 10427-s 9106-S. or try to measure the diameter the original have 24T and if the diameter is the same than the 24T in this pack, but be sure need to be exact diameter and 24T if not can't mach. and the height: 9mm 24T: 13.5mm Diametral -- this need to be the same than the original same teeths and diameter, if not the Pitch DP can be diferent. Pitch: 48DP -- this is the deep of the teethsSuitable motor shaft diameter: 3.175mm But the better is you ask first to support or search for the original spare.
2020-02-04 01:23:14 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
DanSourmayo I have used up to 1.5amps without an issue. If you have a bench supply, you could sacrifice one connector and test how many amps it could handle.
2021-08-20 03:35:58 Helpful (0)