Gugman I suppose if you buy one you can do whatever tests you like to it. As for whether will it run after breaking it would be the same for anything else when it is broken. Usually no as it is broken therefore it will not run or work anymore.

Gugman This motor is for a 1:12 scale car and the Flyhal 9135 is a 1:16 scale car and it would need extensive modifications even trying to cram it in there as the motor mount and pinion on this motor are a real pain to try and remove. You would be better off looking at an ESC and motor combo from Surpass Hobby that would be more suitable for a car of that size.

Gugman 3.175mm.

Gugman Whenever their holiday festivals end then start working again.

Gugman Nowhere in the listing does it say anything about the parts being for a 1:10 scale car and shows that it is 1:14 scale. The WLtoys 144001 is 1:14 and has a brushed motor and the 144010 has a brushless motor. The first two numbers are the scale size of the cars indicating that they are 1:14 scale cars. The WLtoys 104001 is a 1:10 scale car and has a brushed motor and the 104002 has a brushless motor. Then there are the 124007, 124016, 124017, 124018, and 124019 cars that are 1:12 scale cars as the 18 and 19 cars have a brushed motor and the 07, 16, and 17 cars have brushless motors. The wheels shown are the same ones used on the 144010, 124007, 124016, and 124017 but can also be used on the 144001, 124018, and 124019. They are just offroad wheels the brushless cars came with, unlike the brushed motor versions that have wheels for use on road or carpet.

Gugman The body, Front wheels, and Rear wheels are all sold separately and not all together.

Gugman Only in B version.

Gugman Thereis a size guide located between the shirt options and sizes shown with the choices of country size guide you would like. Size (US) Size (CA) Size (UK) Size (AU) Size (EU) Size (FR) Size (IT) Size (RU) Size (JA) Size (BR) So a US size would be L.

Gugman Itis completely ready except for the Bluetooth Wifi connectivity module which has to be done yourself apparently.

Gugman Iam unsure as usually parts from different manufacturers do not fit other makers' RC cars due to slight size differences in parts.

Gugman No, the motor is a 2845-sized motor for a 1:12-scale car. The SG 1603 is only a 1:16-scale car and the motor for it is only a 2435-sized motor. There are many upgrade parts available for the SG 1603 but not from the sellers on Banggood. do a web browser search for SG 1603 upgrade parts and you will find so much more parts available even a brushless motor for it.

Gugman This motor is a lot smaller as it is only a 2845-sized motor and would most likely not fit the 104001's motor mount. The pinion gear is M0.7 and the wrong pitch as the one for the 104001 uses an M0.6. The best motor size would be a 3650 to match the brushed 550-sized motor in the 104001. I used a Surpass Hobby 3650 3600KV motor and 60A ESC combo that can use 2S or 3S Lipos and got a new motor mount and the 22T pinion gear to install it with. WLtoys annoyingly use a really strong loctite compound on all the screws and so many times I have ended up stripping all the heads on the screws trying to remove them.

Gugman If your A30 is the exact same size or smaller than a Galaxy S6 edge it should fit. If it is lager then no.

Gugman No.

Gugman 7-13cm.

Gugman No. The mounting holes are in slightly different positions. The differential gears for the XLF are much bigger in size but shorter in length than the WLtoys ones. The XLF gears would not even fit inside the case. Even though both cars are similar there are too many differences in their parts.