All Messages

erberes You have to buy an adapter named SZM CT 1 per 3 (upper diameter 25mm, lower diameter 28mm; make sure that this is also the adapter size that you've received before purchasing anything). Note: I had to use "per' in place of per sign as it's not allowed in the answer. The supplied adapter is 1X, that does not have any lens and thus it provides a huge magnification (narrow field of view) and due to narrow FOV low light (means noise as well even with an excellent C mount camera). Alternatively you can by SZM CT 1 per 2 adapter but that also provides narrower view (and greater magnification). I've tried to buy these adapters here, but after 1 month waiting I gave up. With that adapter the camera is OK (although there are much better AF cameras for example Eakins 5M with Sony IMX178 sensor).

2020-10-19 08:00:31 Helpful (0)
Submit
Answers (5)
erberes 2019-04-18 07:17:48
1
Recommendations
Comments (0)

Top reviewers you may like:

erberes 2020-07-15 12:05:20
0
Recommendations
Comments (0)

Top reviewers you may like:

erberes 2020-07-07 05:58:59
It was long on my shopping list but as Banggood made it available with EU shipping I've finally pulled the trigger. Shipping was fast (a week) and as already the product packaging was excellent so Banggood did not need to do much (but someone has forget to add my street and house number to the package, luckily my phone number was there so postal service could call me - please fix this!). The box contains every accessory that is needed, USB adapter, Y USB wire for powering both the LEDs and the display (this serves also as on/off switch and LED light strength control), a separate USB cable for PC connection of the display (in which case it also powers the display), HDMI cable and remote control (without battery). There is also a very well organized manual with clear english. The stand is very sturdy as described and it's easy to operate (I did not even need to check the manual). The LCD gives a clear view of small components with a very good working distance. The whole product is well thought out. To longer the life of the LEDs it's probably a good idea to use it at max power only when needed. The only case when I needed the higher LED power was at max digital magnification to reduce noise, otherwise picture is pretty noiseless even with medium level. There is only one minor issue that could be improved: The change of the digital magnification is rather slow and it's in unnecessarily small steps (in bigger steps the speed probably would not be an issue). All in all it's one of the best product that I've bought recently and although it's not cheap, in my view it well worth the price. Highly recommended.
0
Recommendations
Comments (0)

Top reviewers you may like:

erberes 2020-05-11 04:12:58
0
Recommendations
Comments (0)

Top reviewers you may like:

erberes 2020-05-11 04:12:58
0
Recommendations
Comments (0)

Top reviewers you may like:

Q: Is battery included?

Asked by erberes on 2020-05-11 04:29:15

pappu_lqf Yes

2020-05-14 04:07:28 Helpful (2)
Submit
Answers (1)
erberes 2020-02-22 02:16:30
0
Recommendations
Comments (0)

Top reviewers you may like:

erberes 2020-02-22 02:16:27
0
Recommendations
Comments (0)

Top reviewers you may like:

erberes 2019-11-26 01:48:44
0
Recommendations
Comments (0)

Top reviewers you may like:

erberes 2019-11-20 01:53:18
Banggood shipping is as always excellent (fast and dependable). Unfortunately there is no earpiece in the package (although supposed to be based on the description). There is no programming cable in the package either (although supposed to be based on the manual). I don't know which to believe. Luckily the cable is just an ordinary micro USB that you probably have around. The cable is a must as you need it for programming. Manual points to the right direction (quite hefty ~100 pages long) but there is still a lot to be improved in the documentation. Well known/obvious things are repeated over and over (like how to navigate to a given menu point, or how to exchange communication with PTT button), less obvious ones are not explained in sufficient detail. As this digital radio is pretty new, there is not much review/blog about how to use it. You need to google and check my links below (download link is most important, this radio is a 1702 variant). To program the radio you need a program called MD (chirp does not work yet). The version I've used is: 1.00.66. The programming is very simple, read radio data, change it and write it back. Keep this order always so that you don't overwrite setting accidentally. https://baofengradio.ca/pages/support-download http://www.baofengradio.com/product/101.html https://familyrations.com/pages/what-is-the-difference-between-a-baofeng-1702-and-dm-x The radio is excellent digital+ analogue radio with great flexibility (though it has no FM reception capability), highly recommended. On the photo it's next to UV-9R (that is analogue only, but that's also great value).
0
Recommendations
Comments (0)

Top reviewers you may like: