Banggood

Very nice boards for hobby projects. Only one side has copper on it, keep this in mind! The rows and columns are marked with letters and numbers. Holes look clean and nice.

Good to build small circuits (in photo for example a LED cube), aided by the printed references. It is easy to solder on, but you must not insist because the pads can easily drop off. Fixing holes should have been more centralized to have margin to wide them at 3 mm, being difficult to find screws with smaller diameter. Ottimo per realizzare piccoli circuiti (ad esempio in foto un cubo LED), facilitati dai riferimenti stampati. Vi si salda facilmente, ma non bisogna insistere perchè la piazzola viene

Nice and cheap raster style PCB for prototyping. I liked the size for small projects but if you work compact you can fit quite a lot of one PCB. Soldering was nice and easy. In the pictures is a small FM transmitter of the PCB.

buon prodotto

recomendo chegou tudo bem !

Buen producto gracias

Very good

ok

The PCB's arrived, and are of decent quality, but the pads can come off quite easily with enough solder applied to a joint. Good price for what arrived.

These are affordable and good quality. They can be cut or snapped into smaller sizes too. Perfect to prototype electronics.