Banggood

Servo appears well built having an aluminium centre casing with plastic end caps. End caps have seals between them and centre casing to keep dirt out and a seal around the servo lead exit however there is no seal between the top casing and output shaft so dirt and moisture can get in. Top casing was removed to check gears and they are all metal as described and look well manufactured, the only issue I could see was there was no grease in the output shaft bearing. I have used some light silicone grease to lubricate the ball race and also put some around the output shaft to help stop dirt and moisture getting into the servo. The included metal servo arm is good quality and of the double bolt clamp design which is very good. Servo movement is 85° on standard settings (1000µs - 2000µs) so I think that you may be hard pushed to get 180° movement out of this servo. I do not have an accurate test rig but I was seeing in excess 20kg/cm on my setup which is more than enough for my needs. These appear to be very well built servos that should work well in service and taking into consideration the price they are excellent. Servos were ordered, dispatched and received in 8 days from China to UK so excellent service all around.

Servo appears well built having an aluminium centre casing with plastic end caps. End caps have seals between them and centre casing to keep dirt out and a seal around the servo lead exit however there is no seal between the top casing and output shaft so dirt and moisture can get in. Top casing was removed to check gears and they are all metal as described and look well manufactured, the only issue I could see was there was no grease in the output shaft bearing. I have used some light silicone grease to lubricate the ball race and also put some around the output shaft to help stop dirt and moisture getting into the servo. The included metal servo arm is good quality and of the double bolt clamp design which is very good. Servo movement is 85° on standard settings (1000µs - 2000µs) so I think that you may be hard pushed to get 180° movement out of this servo. I do not have an accurate test rig but I was seeing in excess 20kg/cm on my setup which is more than enough for my needs. These appear to be very well built servos that should work well in service and taking into consideration the price they are excellent. Servos were ordered, dispatched and received in 8 days from China to UK so excellent service all around.

Servo appears well built having an aluminium centre casing with plastic end caps. End caps have seals between them and centre casing to keep dirt out and a seal around the servo lead exit however there is no seal between the top casing and output shaft so dirt and moisture can get in. Top casing was removed to check gears and they are all metal as described and look well manufactured, the only issue I could see was there was no grease in the output shaft bearing. I have used some light silicone grease to lubricate the ball race and also put some around the output shaft to help stop dirt and moisture getting into the servo. The included metal servo arm is good quality and of the double bolt clamp design which is very good. Servo movement is 85° on standard settings (1000µs - 2000µs) so I think that you may be hard pushed to get 180° movement out of this servo. I do not have an accurate test rig but I was seeing in excess 20kg/cm on my setup which is more than enough for my needs. These appear to be very well built servos that should work well in service and taking into consideration the price they are excellent. Servos were ordered, dispatched and received in 8 days from China to UK so excellent service all around.

It took twice as long as it was scheduled for delivery. This order came from the EU warehouse, I had other orders placed after this coming from China, which arrived long before this. I don't think that's normal. Moreover, the order was well packed, and the Servos look good. I haven't tested them yet.

It took twice as long as it was scheduled for delivery. This order came from the EU warehouse, I had other orders placed after this coming from China, which arrived long before this. I don't think that's normal. Moreover, the order was well packed, and the Servos look good. I haven't tested them yet.

It took twice as long as it was scheduled for delivery. This order came from the EU warehouse, I had other orders placed after this coming from China, which arrived long before this. I don't think that's normal. Moreover, the order was well packed, and the Servos look good. I haven't tested them yet.

Working great so far. Haven't used them out in the field yet, only inside. Somehow my 6v Humppack didn't work with them, even fully charged the current was too low. (Humppack probably was dead) Got a 6.6v LiFe battery and now they work fine. Not the fastest but I think they seem to be the best on a budget. If I can I will update this review after using them.

Working great so far. Haven't used them out in the field yet, only inside. Somehow my 6v Humppack didn't work with them, even fully charged the current was too low. (Humppack probably was dead) Got a 6.6v LiFe battery and now they work fine. Not the fastest but I think they seem to be the best on a budget. If I can I will update this review after using them.

Working great so far. Haven't used them out in the field yet, only inside. Somehow my 6v Humppack didn't work with them, even fully charged the current was too low. (Humppack probably was dead) Got a 6.6v LiFe battery and now they work fine. Not the fastest but I think they seem to be the best on a budget. If I can I will update this review after using them.

Fast delivery 👍! Now also in use in my second 1:10 crawler, as a replacement for a 6 Kg Original servo. Should also be good in other off-roaders Doing! No slower than the original servo and the Power is enormous, does n't buzz under load! For all-wheel steering on a regulator with pay attention to a sufficiently high BEC current, e.g. Hobbywing 1080. Body is made by ZD Racing, Chassis Carson Crawlee XL

Schnelle Lieferung 👍! Jetzt auch in meinem zweiten 1:10 Crawler im Einsatz, als Ersatz für ein 6 Kg Original Servo. Sollte auch in anderen Offroadern gute Dienste tun! Nicht langsamer als das Original Servo und die Kraft ist enorm, brummt nicht unter Last! Bei Allrad Lenkung auf einen Regler mit ausreichend hohem BEC Strom achten, z.b. hobbywing 1080. Karosserie ist von ZD Racing, Chassis Carson Crawlee XL

Fast delivery 👍! Now also in use in my second 1:10 crawler, as a replacement for a 6 Kg Original servo. Should also be good in other off-roaders Doing! No slower than the original servo and the Power is enormous, does n't buzz under load! For all-wheel steering on a regulator with pay attention to a sufficiently high BEC current, e.g. Hobbywing 1080. Body is made by ZD Racing, Chassis Carson Crawlee XL

In 1:10 Crawler in use, as a replacement for a 6 kg original servo. Should also do good service in other off-roaders! No slower than the original servo and the power is enormous, does not humming under load! For all-wheel steering, pay attention to a regulator with sufficient BEC current, e.g. hobbywing 1080. Body is by ZD Racing, Chassis Carson Crawlee XL

Im 1:10 Crawler im Einsatz, als Ersatz für ein 6 Kg Original Servo. Sollte auch in anderen Offroadern gute Dienste tun! Nicht langsamer als das Original Servo und die Kraft ist enorm, brummt nicht unter Last! Bei Allrad Lenkung auf einen Regler mit ausreichend hohem BEC Strom achten, z.b. hobbywing 1080. Karosserie ist von ZD Racing, Chassis Carson Crawlee XL

In 1:10 Crawler in use, as a replacement for a 6 kg original servo. Should also do good service in other off-roaders! No slower than the original servo and the power is enormous, does not humming under load! For all-wheel steering, pay attention to a regulator with sufficient BEC current, e.g. hobbywing 1080. Body is by ZD Racing, Chassis Carson Crawlee XL

Came in a plastic bag no box or bubble wrap lol but arrived safe both tasted and work good I've bought about 10 of these in the last year or so and I put one in each of my Rc Trucks 1/8 and my Rc Crwalers 1/10 all still work great no problems at all!

Came in a plastic bag no box or bubble wrap lol but arrived safe both tasted and work good I've bought about 10 of these in the last year or so and I put one in each of my Rc Trucks 1/8 and my Rc Crwalers 1/10 all still work great no problems at all!

Came in a plastic bag no box or bubble wrap lol but arrived safe both tasted and work good I've bought about 10 of these in the last year or so and I put one in each of my Rc Trucks 1/8 and my Rc Crwalers 1/10 all still work great no problems at all!

nice quality Heard good things about this servo so I'll try them in two projects I've got going on and see how they fair wil update this review when I have rigorously tested them

nice quality Heard good things about this servo so I'll try them in two projects I've got going on and see how they fair wil update this review when I have rigorously tested them

nice quality Heard good things about this servo so I'll try them in two projects I've got going on and see how they fair wil update this review when I have rigorously tested them

They arrived a little bit difficultly, but good servos on a favourable price!

They arrived a little bit difficultly, but good servos on a favourable price!

They arrived a little bit difficultly, but good servos on a favourable price!

Fast shipping good product Great mod for traxxas erevo2.0

Fast shipping good product Great mod for traxxas erevo2.0

Fast shipping good product Great mod for traxxas erevo2.0

used on the wl toys buggy . fast strong great servo

used on the wl toys buggy . fast strong great servo

used on the wl toys buggy . fast strong great servo