3000W AC220V-250V to DC 48V 62A ZVS Heating Switching Power Supply R48-3000e3 For Induction Heater
A part of the review has been auto-translated.
I bought it for icharger 4010 duo. Works wery good. It is not so loud compare to other power supply's that i use before. It was bit scrached look's like second hand. Anyway doing a good job. Hope its gonna stay like this. Thank u banggood!
Good product but its fan produces a lot of noise
it is a used, little bit of dirt, makes a lot of noise, current is limited to 65A, voltage increases with battery,pcb gets hot
it arrived on time in good packaging, during operation without a load on the output the orange light flashes, I don't know if this is a problem
feed that seems second-hand at the sight of the multiple stripes on the aluminium fast transport but well shaken and ok because well packed well seen the detachable connector on the back: - on the one hand it avoids shock and risk of fragility, even fire linked to strong currents... - on the other hand it facilitates connections without being taken at short distance to the back of the power supply in less good: - Surprised that the connectors are both welded a bit crooked but good not necessarily impact to use I will say more later - for the DC part sincerely I had planned a big cable, for 3000W under 48 volts by immaginating 160 amps in the small DC screws, my eyes are already flashing... Are there people who have used this power supply for long periods of time by making it output 3000W on this terminal block? I priced a photo of a fork whose size we imagine to better reflect this... The cables I expected were the size of the red handle of the fork and therefore bcp too big...for the terminal block provided with and difficult to make another one with more substantial bolts... in the end apart from this doubt about the terminal block, I trust the user comments... It seems to me good stuff ;) The price per kW output is very well placed.
Ürün anlatıldığı gibi
packet arrived as well. good quality as price. can be use induction heater application and cnc stepper motor supply.
This is a used high quality power supply. I'd expect it would be very expensive new. It is better than I expected. but it has had some rough handling - The aluminium case was bent up at the rear end and I had to do some panel beating to fix it. It had acceptable packaging and no evidence of shipping damage. i suspect it was damaged before packaging. Fortunately I dodged a bullet and ther were no damaged electrical components and it works perfectly. The fan is quite load, not a fault, just loud due to small fan at high rpm and has probably been like that since new. Lucky is goes in my shed. It is 48 Volts with no way to adjust the voltage like some others that are available - at least that I have been able to find.
Finally a product that works well
This is a brilliant move by Banggood to provide these very high quality, gently-used high-power-factor SMPS modules to the DIY induction heating community. The module I received was in good shape and works perfectly. It is exactly what was has been needed for a long time on my power electronics workbench. They even went to the bother to provide a their own edge-board connector to facilitate the use of this module. Someone somewhere in China is making great decisions that benefit many people.