Customer Reviews

4.94 out of 5
See all 33 reviews
Write a Review
  • All Reviews (33)
  • Image (1)
  • Video (0)
  • All Star
    • All Star(33)
    • 5 Star(31)
    • 4 Star(2)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 19/06/2019

    a good produc

    Comments
    Show Original
  • 16/02/2021

    I have 3 of these Linear Guide sets now for an X/Y pen plotter that may evolve into some sort of CNC tool. I had two problems with the guides, but they were easily fixed. One of the white 3D-printed blocks that holds the idler wheel cracked badly. I machined a replacement out of aluminum and all works good. The other was that all the V-roller wheels ran rough and stuck in some locations. I thought they were bad bearings, but then discovered that the nut and the small brass washer on either side of the bearing/wheel were rubbing on the rotating part when all was tightened down. I added a small cone-shaped lock washer on both sides of the bearing, and now only the stationary inner portion of the bearing is gripped, and the wheel rolls smoothly. The small roller platform moves much smoother and easier now. The motors have worked with no problems. I use the Hanpose TB6600 drivers. This has been a good learning project.

    Comments
    Show Original
  • 13/01/2022

    Good product, came well packed in good time, only thing not provided is limit switch and motor leads.

    Comments
    Show Original
  • 13/04/2021

    good quality, well made but have yet to use too much so I don't know how long it will last.

    Comments
    Show Original
  • 10/03/2021

    item looks very good and fulfill expectation missing mating connector definition. it will be very helpfull

    Comments
    Show Original
  • 11/01/2022

    Great product and service

    Comments
    Show Original
  • 18/06/2021

    As description

    Comments
    Show Original
  • 02/05/2021

    Bom product

    Comments
    Show Original
  • 31/01/2021

    Perfect

    Comments
    Show Original
  • 23/11/2019

    Note: This is for 400 cm option Sturdy build. Quality parts, and smooth operation. The overall length is about 22 inches, and the travel is about 18 inches. The stepper is standard NEMA 17 with 1.8 deg step with a total revolution of the stepper shaft at 200 steps. For the quality you get, this is a steal of a deal. I highly recommend if you are building budget CNC machine, 3D printer, and engraving machine.

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$6.29
    • US$8.39
    • US$5.24
    • US$3.39
    • US$7.34
    • US$22.49
    • US$8.99
    • US$24.83
    • US$7.29
    • US$19.79
    • US$7.99
    • US$15.29
    • US$7.99
    • US$14.13
    • US$5.99
    • US$7.99
    • US$6.99
    • US$7.71