Customer Reviews

4.92 out of 5
See all 368 reviews
Write a Review
  • All Reviews (368)
  • Image (34)
  • Video (0)
  • All Star
    • All Star(368)
    • 5 Star(347)
    • 4 Star(13)
    • 3 Star(6)
    • 2 Star(2)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
|
Show Original

A part of the review has been auto-translated.

  • 10/09/2013

    Makes it really easy to add a LCD to your Arduino projects. The only con is that it doesn't have headers to add wires. It just have holes for you to solder your own headers. The LCD uses 6 ports and the keypad uses only one. Works fine with Arduino Leonardo and UNO.

    Comments (1)
    Show Original
  • 07/01/2014

    Test avec une carte MEGA2560. Prendre le lien suivant : http://www.dfrobot.com/wiki/index.php?title=Arduino_LCD_KeyPad_Shield_(SKU:_DFR0009) Fonctionne super bien. Le réglage de l'écriture en blanc sur bleu par le potentiomètre a une forte amplitude, on arrive même a écrire bleu foncé sur fond bleu clair. Une étoile en moins car l'écran comporte un défaut mais en dehors de la zone d'affichage.

    Comments
    Show Original
  • 08/12/2013

    The one I received is the 1.0 version of the shield. The only difference are the resistor divider values for the button network. I soldered on some female headers to further connect some breadboard wires on top of this thing. Works great and best price I could find on the internets. The manual and example code for this device is located here: http://www.dfrobot.com/wiki/index.php?title=Arduino_LCD_KeyPad_Shield_(SKU:_DFR0009)

    Comments
    Show Original
  • 12/04/2019

    Cegou tudo ok, bom aspecto e qualidade. Arrived everything ok, good looking and quality.

    Comments
    Show Original
  • 13/09/2017

    Great value and no real issues. Like other people have mentioned a lot of the pins arrived bent and needed straightening. Its annoying but not a deal breaker. if you search the interwebs for "keypad shield test sketch" you will find a sketch to get you up and running. If your wondering how to line up the pins, just make sure the A0-A5 pins on the shield match with the A0-A5 on the board. One thing to note you may find there is no text on the screen in which case you will have to turn the potentiometer screw (the brass screw on the blue box in the top right) clockwise many many times before you begin to see the text.

    Comments
    Show Original
  • 25/11/2014

    As per http://forum.arduino.cc/index.php?topic=96747.0 there is a problem with the backlight control pin. With the board that I received if you attempt to use the backlight control you can potentially break the AVR in your arduino board. Otherwise the board works perfectly including the backlight, just don't try and switch the backlight off with pin 10.

    Comments
    Show Original
  • 01/10/2014

    Works very good. Tested with this code : http://www.dfrobot.com/wiki/index.php?title=Arduino_LCD_KeyPad_Shield_(SKU:_DFR0009). Just take the v1.0 values. The markings are not very well made, but all the electronics works great! I will buy more

    Comments
    Show Original
  • 02/04/2022

    Fast delivery. Fine packing. Functional test shows that everything is according to item description. Potentiometer was set too high, so it is necessary to adjust it. Usage of standard Liquid Crystal library.

    Comments
    Show Original
  • 18/03/2022

    Well packaged, received in good condition and excellent delivery time (9 calendar days from order). I bought this just for experimentation.

    Comments
    Show Original
  • 07/02/2019

    Works perfect

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$12.59
    • US$41.99
    • US$41.99
    • US$25.19
    • US$40.94
    • US$31.49
    • US$20.99
    • US$19.94
    • US$65.09
    • US$10.49
    • US$22.12
    • US$20.99
    • US$7.55
    • US$38.84
    • US$33.60
    • US$40.94
    • US$79.79
    • US$16.35