Customer Reviews

5 out of 5
See all 10 reviews
Write a Review
  • All Reviews (10)
  • Image (4)
  • Video (0)
  • All Star
    • All Star(10)
    • 5 Star(10)
    • 4 Star(0)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United Kingdom)
Show Original

A part of the review has been auto-translated.

  • 22/03/2024

    The shipment arrived on time and everything is functioning properly with simple controls. The only issue is that you must use a suitable charger (minimum 2A) otherwise it malfunctions!

    Show Original
  • 10/04/2024

    10/10 excellent charger

    Show Original
  • 07/04/2024

    This is a good and versatile charger. Below I'll give some additional info you won't find in the user manual. 1) Short touch any key to turn on the backlight. It will stay on for 30 seconds, then it will automatically turn off. 2) Long touch the Current key until the beep tone stops. This will turn on the backlight permanently. Repeat this two times to turn the backlight off. 3) The charging process of Li-ion batteries will will be terminated at 4.22V but the display shows 4.20V. This is +0.48%, barely within the usual tolerance of +/-0.5% given for other chargers. I wish it were closer to 4.20V. Other pieces of this type may vary. 4) In Discharge and Test modes Li-ion batteries will be discharged to 2.82V. This is no problem with the charger, this is the usual way to test capacity but not so good for the battery. So don't use these features too often! My personal opinion is that the max. discharge current of 500mA is too small, it takes 15+ hours to test a 5000mAh battery. This is way too long, I miss an option for 1000mA discharge current. On the other hand you don't test batteries even on a weekly basis, so you can let the charger take its time. 5) Disconnect the USB input cable to enter USB power bank mode. The device draws 150mA from the battery in standby mode, including the backlight, which is always on in this mode. With a load of ca. 1300mA it draws 2A from a full battery. At first glance it may seem bad efficiency but it is not because the 4V battery drives a boost converter to produce the 1300mA at 5V. This requires ca. 1625mA from the battery, plus the 150mA standby current. So the efficiency of the boost converter is 1625/(2000-150) = 87%. This is very good. All in all, this is an excellent product, very good value for your money. Highly recommended!

    Show Original
  • 02/04/2024

    very good

    Show Original
  • 28/01/2024

    Fast shipping, good packaging, charger with many useful functions. Great for testing old batteries and seeing the exact remaining capacity, it also shows the difference between the charge made and the discharge obtained in mAh. It has 4 truly independent channels and can be used with any USB power supply with at least 2A output. Highly recommended!

    Show Original
  • 19/03/2024

    it was super fast, I recommend it

    Show Original
  • 22/02/2024

    Very useful unit. Have been used for a month and It and works as described.

    Show Original
  • 08/01/2024

    this is a great product. I suggest.

    Show Original
  • 03/01/2024

    I was blown away by the speed of the delivery and the professionalism. the product is better than I had expected I am very pleased with it

    Show Original
  • 22/12/2023

    I haven't tried it yet, I trust it!!

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$13.52
    • US$6.25
    • US$8.24
    • US$19.99
    • US$29.93
    • US$17.07
    • US$6.97
    • US$38.95
    • US$59.95
    • US$13.99