Nicesky Hurricane MK.1A 700mm Wingspan Warbird RC Airplane KIT
A part of the review has been auto-translated.
beautiful model 🤗🤗🤗🤗🤗
Thank you for purchasing everyone I RECOMMEND this store.
Collissimo, very well packed. Airplane in EPP, tested with cyano. Well painted, just the leading edge of the back plane that lacks a bit of paint. I've got to get him out of here. Careful, there's no train. The air intake under it will charge.
sveikas,gražus,viskas ok
Great item, fast shipping!
the kit arrived fast and well packed. the plane is made of EPS, not durable at all. No instructions, so know what you're getting into. The motor bay is too deep for basic drone motors, I printed a motor mount to fit (18mm tall, to fit a cheap 2205). servo spaces are for 9g servos. There is quite a bit of DIY to get it right. even with light electronics and a 450mah 3s(and had to enlarge the compartment inside. The propeler, if I remember correctly has a 2mm hole, not 3.17mm like someone wrote in his review. so 2mm with a hex nut insert hole. I just used my own 5x5 prop. I needed extra 20g of weight on the nose for good CG. flies decent and quite fast, I'd say stall speed is ~30km/h, but needs at least 40 to respond ok to commands. I got AUW at 350g, with the 2205 2400kv motor running a 5x5 prop, on 3s 450mah lipo does a good vertical. enough power to get out of a stall that can happen quite easy at slow flight. Definitely not for first time flyers nor builders.
everything went great
A nice plane
The airplane kit arrived in good condition from US warehouse. It will be fun building it up. Thank you Banggood!
Fast shipping, arrived unharmed. No detailed instructions, so you should be a bit familiar with the subject. Good workmanship. Unbeatable for the special price of just under 30 €! The propeller is designed for a 3.17 mm shaft (most motors on BG have 5mm).