ok, so this just showed up, shipping was some what on time took a few days over a week. I must say assembly is super simple and the plans could be better as ever step is not shown so some guessing is needed. I got the unit with power system as it was the only one available. You can have this bird assembled in about and hour or so, but if your adding in a Fc then you'll be on the bench for a couple more hours. This unit came with a legit sunnysky motor, 40a SM esc, and some metal gear servo's which appear to be in the 9-12g range. If your planing on installing your fc in the rear bay you will need to swap out the stock esc, it's big, and the gps housing is directly above it keep this in mind when mapping out electronics. This bird has enough space for a dual video system as it has 2 pockets on each wing half, and 2 more inner pockets on the fuse, plenty of room and separation. Comes with x2 nose pieces for your choice of video system. one is made for the Dji fpv system and like the Ar900 has a outer location for another camera, it's just on the left side of the fuse. All in all this is a well planned out bird that should provide hrs of fpv fun. This is not a first timer wing unless you install a copilot system!! Even with a 4200 4S pack weight is still needed to hit cg keep this in mind also as the only place to shave weight is remove the stock set up or just the esc!!

ok, so this just showed up, shipping was some what on time took a few days over a week. I must say assembly is super simple and the plans could be better as ever step is not shown so some guessing is needed. I got the unit with power system as it was the only one available. You can have this bird assembled in about and hour or so, but if your adding in a Fc then you'll be on the bench for a couple more hours. This unit came with a legit sunnysky motor, 40a SM esc, and some metal gear servo's which appear to be in the 9-12g range. If your planing on installing your fc in the rear bay you will need to swap out the stock esc, it's big, and the gps housing is directly above it keep this in mind when mapping out electronics. This bird has enough space for a dual video system as it has 2 pockets on each wing half, and 2 more inner pockets on the fuse, plenty of room and separation. Comes with x2 nose pieces for your choice of video system. one is made for the Dji fpv system and like the Ar900 has a outer location for another camera, it's just on the left side of the fuse. All in all this is a well planned out bird that should provide hrs of fpv fun. This is not a first timer wing unless you install a copilot system!! Even with a 4200 4S pack weight is still needed to hit cg keep this in mind also as the only place to shave weight is remove the stock set up or just the esc!!

ok, so this just showed up, shipping was some what on time took a few days over a week. I must say assembly is super simple and the plans could be better as ever step is not shown so some guessing is needed. I got the unit with power system as it was the only one available. You can have this bird assembled in about and hour or so, but if your adding in a Fc then you'll be on the bench for a couple more hours. This unit came with a legit sunnysky motor, 40a SM esc, and some metal gear servo's which appear to be in the 9-12g range. If your planing on installing your fc in the rear bay you will need to swap out the stock esc, it's big, and the gps housing is directly above it keep this in mind when mapping out electronics. This bird has enough space for a dual video system as it has 2 pockets on each wing half, and 2 more inner pockets on the fuse, plenty of room and separation. Comes with x2 nose pieces for your choice of video system. one is made for the Dji fpv system and like the Ar900 has a outer location for another camera, it's just on the left side of the fuse. All in all this is a well planned out bird that should provide hrs of fpv fun. This is not a first timer wing unless you install a copilot system!! Even with a 4200 4S pack weight is still needed to hit cg keep this in mind also as the only place to shave weight is remove the stock set up or just the esc!!

Arrived quickly, well packed, no damage. Foam quality is fantastic, finish is the best I've seen with EPP. Huge fuselage bay, side pockets for VTX and RX if you like. I'm using a Frsky X8R, sbus to a ZOHD Kopilot. Pictures of it's new stablemates. Could be my go to model. 👽

Arrived quickly, well packed, no damage. Foam quality is fantastic, finish is the best I've seen with EPP. Huge fuselage bay, side pockets for VTX and RX if you like. I'm using a Frsky X8R, sbus to a ZOHD Kopilot. Pictures of it's new stablemates. Could be my go to model. 👽

Arrived quickly, well packed, no damage. Foam quality is fantastic, finish is the best I've seen with EPP. Huge fuselage bay, side pockets for VTX and RX if you like. I'm using a Frsky X8R, sbus to a ZOHD Kopilot. Pictures of it's new stablemates. Could be my go to model. 👽

Great model. I made a few mods to it

Great model. I made a few mods to it

Great model. I made a few mods to it

What an amazing upgrade from the first AR wing. This new one has many great features that makes it perfect for FPV. See how well it flies here https://www.youtube.com/watch?v=__R3h503lBQ

What an amazing upgrade from the first AR wing. This new one has many great features that makes it perfect for FPV. See how well it flies here https://www.youtube.com/watch?v=__R3h503lBQ

What an amazing upgrade from the first AR wing. This new one has many great features that makes it perfect for FPV. See how well it flies here https://www.youtube.com/watch?v=__R3h503lBQ

excellent article!

excelente artículo !

excellent article!

all ok

all ok

all ok

Solid build. putting 6s setups with 60 amp ESC. wanted to make it a racer as FPV flying is not permitted in Australia any more. All good in this model apart from CG. Why no one tested? 150 grm lead

Solid build. putting 6s setups with 60 amp ESC. wanted to make it a racer as FPV flying is not permitted in Australia any more. All good in this model apart from CG. Why no one tested? 150 grm lead

Solid build. putting 6s setups with 60 amp ESC. wanted to make it a racer as FPV flying is not permitted in Australia any more. All good in this model apart from CG. Why no one tested? 150 grm lead

ONE of the best wing on the market!!! perfect shipment and packaging!!!

ONE of the best wing on the market!!! perfect shipment and packaging!!!

ONE of the best wing on the market!!! perfect shipment and packaging!!!

Fast shipping, product according to description, still to be tested.

Envío rápido, producto de acuerdo a la descripción, aun falta probar.

Fast shipping, product according to description, still to be tested.

Good quality product. I recommend buying.

Good quality product. I recommend buying.

Good quality product. I recommend buying.