Wall Mount Hooks Stand Holder Guitar Hangers Musical Instrument Parts
A part of the review has been auto-translated.
Most sizes of VESA mount have four screw-holes arranged in a square on the mount, with matching tapped holes on the device. The horizontal and vertical distance between the screw centers was originally 100 mm. A 75 mm × 75 mm layout was defined for smaller displays. Later, variants were added for screens with as small as a 4-inch diagonal. The FDMI was extended in 2006 with additional screw patterns that are more appropriate for larger TV screens. Thus the standard now specifies 7 sizes, each with more than one variant. These are referenced as parts B to F of the standard or with official abbreviations, usually prefixed by the word "VESA". Unofficially, the variants are sometimes referenced as just "VESA" followed by the pattern size in mm, which is slightly ambiguous for the names "VESA 50" (4 possibilities), "VESA 75" (2 possibilities) and "VESA 200" (3 possibilities). However, if "VESA 100" is accepted as meaning the original variant ("VESA MIS-D, 100"), then all but "VESA MIS-E" and "VESA MIS-F, 200" have at least one unique dimension that can be used in this way, as can be seen from the tables below.
I love these. It might look like the tabs at the end of the "fork" will close as some other hangers do. These don't, they are static.
Pour une guitare acoustique pas trop lourde d'accord. Mais pas pour une guitare électrique, le plastique est trop souple et ploie sous le poids.
feels cheap but Does the job
Working good so far.
Good Quality...
envio rapido y buena calidad predio
The quality of the plastic is good, it looks like it doesn't break easily and has good finish. The parts that get in contact with the guitar have foam.
Для акустической гитары подойдет. Для электро кажется хлипковатой. Может обломиться (не сразу, со временем) под весом тяжелой гитары.
good quality maybe overpriced for plastic i will buy again if they go on sale