Wltoys K969 K979 K989 K999 1/28 Upgraded 5g Metal Gear Steering Servo K989-58 RC Car Vehicles Parts
A part of the review has been auto-translated.
I’ve bought 3 of these now! Great servos, fast and good metal gears. servo horn gave my drift car quite a bit more steering angle, it drives very nice.
Direct replacement into the wltoys k989. Feels faster than the original servo too and has metal gears so it should outlast the original plastic servo.
good, but you will have to trim part off the servo horn so that it doesn’t hit the top plate. you may also want to trim one of the mounting tabs on the side. overall very good much more powerful
Better than original, need to trim off a bit off the servo horn
nice servo fits fine
Good replacement for wltoys. Servo horn will need to be modified to get full steering
ok
This servo is a direct replacement for the stock WLToys K969/K989 steering servo. It's a higher quality servo than the stock one, it is noticably smoother. It fits into the stock servo mount perfectly. You will want to remove the mounting bracket on the long side of the servo (see photos) so it does not interfere with the body. It comes with only one choice of servo arm, which is the one I have installed in the photos. The arm is longer than the stock one, which is good and bad. Good because it gives a steeper steering angle than stock. Bad because the top plate (removed in photos) interferes with the longer arm's articulation. DIY RC has a video on how to make a custom CF top plate to accommodate a longer servo arm. You could also just cut the arm shorter and use the stock top plate. Overall this is a very good upgrade part.
Servo comes with new pastic servo horn and screw. Servo horn does not have servo saver built into it like original on WL toys K989. Stock setup in second photo. Will most likely have to trim plastic tabs off to fit in K989(979,969) servo holder. Have not installed yet.
works great, replaced the stock one in the mini q after the esc fried and it had a 5 pin plu instead of a 3 pin plug