Bgabriel
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

Bgabriel 23/07/2024
The scope arrived within the deadline, the box shows minor damages and pressures, the scope is not damaged. The controls are quite complicated to use, the flip switch at the top is also a push button. The combination of the control buttons next to the LCD and the rocker switch on top is quite illogical, it is difficult to follow that the top button or the up and down buttons next to the LCD should be used to change a given function. Several times the device got stuck in one of the functions and it was not possible to exit or continue. Several times it was only possible to escape from the stuck function with the Reset button.
FNIRSI DSO153 Oscilloscope Signal Generator Oscope Meter 1M Bandwidth 5MS/s Sampling Rate Oscillometer Multiple Waveforms
US$0.00
2
Recommendations
Comments (1)
Bgabriel 04/06/2022
This is the other kit I bought. The two sets have different goods and technical content, but I couldn’t figure out the difference between the two types of sets. The weather station arrived on time. The kit box was broken, the ESP8266 metal case was pressed in, but the unit still works.
AOQDQDQD ESP8266 Weather Station Kit with Temperature Humidity Atmosphetic Pressure Light Sensor 0.96 Display for Arduino IDE IoT Starter
US$16.10 US$19.32
0
Recommendations
Comments (1)
Bgabriel 23/04/2025
I was surprised by the 3 functions. Finally, the pencil can be charged via USB. Magnetic USB connector protective cap. The charge level indicator on the side of the pencil is fantastic. My cats really like to run around following the red light. You can also check the authenticity of money with the UV light. I really like it and it arrived without any damage.
3-in-1 Red Light Cat Teaser Stick + White Light Mini Torch + UV Flashlight, USB Rechargeable Detecting Mini Pointer Pen Light
US$0.00
0
Recommendations
Comments (0)
Bgabriel 23/04/2025
A little longer and thicker than the previous Xiaomi lamp. Functions: continuous and adjustable brightness, multiple flashing and SOS emergency flashing can be very useful. When placed on a table and using the hanger to change the brightness, you can create a very good mood lighting. Despite its slightly high price, it is a good buy. Kicsit hosszabb és vastagabb a korábbi Xiaomi lámpájához képest. Funkciók folyamatos és állítható fényerejű fény, többféle villogó és SOS vészvillogás nagyon hasznos lehet. Asztalra állítva és a felakasztó használatával fényerő változtatásával nagyon jó hangulatot lehet világítás. Kicsit magas ára ellenére jó vétel.
XIAOMI Mijia 2in1 1000LM Strong Flashlight Dual Color Mood Light Reading Lamp, 3100mAh USB Rechargeable Multi Functional LED Torch, Portable For Outdoor Camping Fishing Walking
US$0.00
0
Recommendations
Comments (0)
Bgabriel 23/04/2025
Arrived without damage, very well packaged and only the box was slightly crushed. The air flow is very strong. Better than a previous version. Small dust container, many other accessories and reversible air flow direction make it a very useful little tool. Accessories can be attached to the motor part with a bayonet lock. Not all accessories can be attached to both sides. Useful structure.
X6 140,000RPM High-Speed Turbo Fan 6000mAh Peak Battery Dual-Function Vacuum Kit Infinite Speed Control 6.0V-8.4V Adjustable Current 3-4 Hours Charging
US$0.00
0
Recommendations
Comments (0)
BlitzWolf BW-EC1 8-in-1 Vertical Cube EU Socket Plug Power Outlet Extender with 4 AC Outlets / 2 USB-A / 2 USB-C for MacBook iPad Game Office Home
US$0.00

Q: what is the function of red button?

Asked by stogge on 2025-02-27 08:34:26

Bgabriel Inprinciple, it trips in case of overload, interrupting the power supply. Type: KYB8 data: 125-250VAC 50Hz, 10A. CE Microswitch. Visible after removing the bottom plate. The screws are under the rubber feet. The plate must be snapped out after unscrewing.

2025-02-27 03:51:55 Helpful (0)
Submit
Answers (2)
Bgabriel 19/02/2025
Arrived in manufacturer-protected packaging, undamaged. Perfect accessory kit for the S9 laser cutter. A gyártó által védett csomagolásban érkezett, sérülés nélkül. Tökéletes kiegészítő alkatrész készlet az S9 lézervágóhoz.
SCULPFUN S9/S10 standard limit switch Open homing positioning function Perfect match S9/S10 Easy to install Direct use no need purchasing additional accessories
US$24.99 US$36.69
0
Recommendations
Comments (0)
Bgabriel 19/02/2025
Arrived in manufacturer-protected packaging, undamaged. Perfect replacement for the S9 laser cutter. A gyártó által védett csomagolásban érkezett, sérülés nélkül. Tökéletes tartalék az S9 lézervágóhoz.
SCULPFUN S9 Original Lens Set 3Pcs original Standard Lens + 2 Acrylic Covers, easy to install, highly transparent, anti-oil and anti-smoke, super long service life
US$15.99 US$26.36
0
Recommendations
Comments (0)
BlitzWolf BW-EC1 8-in-1 Vertical Cube EU Socket Plug Power Outlet Extender with 4 AC Outlets / 2 USB-A / 2 USB-C for MacBook iPad Game Office Home
US$0.00

Q: Can it be mounted on the wall?

Asked by fenriz2 on 2024-08-26 10:01:49

Bgabriel No,there are no mounting holes on the bottom. A thin plastic sheet is held in place by 4 screws under the rubber feet.

2025-02-19 04:29:45 Helpful (0)
Submit
Answers (1)
Bgabriel 19/02/2025
Gyorsan, sérülés nélkül érkezett. Nagyon könnyű a leírás alapján az összeszerelése és a beüzemelése. A beépített alaplap már a DLC32 v1.2 típusú. Remélem amilyen a kivitele olyan jól is lehet majd használni.
[EU/US Direct] SCULPFUN S9 Laser Engraving Machine Laser Beam Shaping Technology High-precision Wood Acrylic Laser Engraver Cutting Machine 410x420mm Engraving Area Full Metal Structure Quick Assembly Design
US$0.00
0
Recommendations
Comments (0)
Bgabriel 19/02/2025
Perfect 90 degree elbow connector for wifi antenna, screw pin and threaded sleeve if needed for the antenna. According to the exact type, this model number is: SKU125178. Wifi antennához tökéletes 90 fokos könyök csatlakozó, csavaros tüske és menetes hüvely, ha ilyen szükséges az antennához. A pontos típus szerint ennek a modellszáma: SKU125178.
1~10 PCS SMA Male To Female Adapter Right Angle Connector 90 Degree Elbow For RC Drone
US$1.00 US$9.99
0
Recommendations
Comments (0)
Bgabriel 19/02/2025
Small size, large capacity. Meets the specified parameters. Kis méret nagy kapacitás. A megfelel a megadott paramétereknek.
2.7V 10F Cylindrical Ultra Super Farad Capacitor High Power Capacitance Supercap 10 x 26mm
US$0.99
0
Recommendations
Comments (0)
2PCS Aluminum Alloy Metric/Imperial Nut and Bolt Thread Checker Bolt Size and Thread Identifier Gauge
US$6.99 US$19.99

Q: Could these be used as insoles for a robot with tired feet?

Asked by iz2222 on 2024-08-02 09:52:43

Bgabriel Thesize is approximately 177x90x1 mm. It is a black painted magnetizable metal sheet.

2025-02-12 06:17:52 Helpful (0)
Submit
Answers (1)
[EU/US Direct] ACMER Laser Equipment Honeycomb Working Table For Sculpfun XTOOL CO2 Cutting Laser Engraver Machine
US$0.00

Q: Is the honeycomb material magnetic, i.e. can you use magnets to hold down thin material?

Asked by CountZero on 2025-02-01 05:30:11

Bgabriel Unfortunately,it is not magnetic! The shiny metal plate underneath is also not magnetizable.

2025-02-12 06:11:52 Helpful (0)
Submit
Answers (1)
Bgabriel 11/02/2025
Finally arrived, after complaining twice. The product's stated external frame size is 300x300 mm. The actual usable working surface is only 260x260 mm. Regardless, it is easy to use and has an attractive design. Végre megérkezett, kétszeri reklamálás után. A terméknél megadott 300x300 mm a keret külső mérete. A kihasználható tényleges munkafelület csak 260x260 mm. Ettől függetlenül jól használható, tetszetős kivitelű.
[EU/US Direct] ACMER Laser Equipment Honeycomb Working Table For Sculpfun XTOOL CO2 Cutting Laser Engraver Machine
US$0.00
0
Recommendations
Comments (0)
Bgabriel 28/01/2025
Pontosan érkezett, szépen kidolgozott termék. Ha tényleg pontosak a méretek akkor sok méréshez etalonnak lehet használni. Még ellenőrzöm a méreteket.
Machifit 2pcs 25x50x75mm Block 23 Hole Parallel Pad Clamping Block Lathe Tool Accuracy 0.005mm
US$21.99 US$39.99
0
Recommendations
Comments (2)

Bgabriel Arrived on time, nicely crafted product. If the dimensions are really accurate, it can be used as a reference for many measurements. I\'m still checking the dimensions.

Bgabriel 28/01/2025
Pontosan érkezett, szépen kidolgozott termék. Ha tényleg pontosak a méretek akkor sok méréshez etalonnak lehet használni. Még ellenőrzöm a méreteket.
Machifit 2pcs 25x50x75mm Block 23 Hole Parallel Pad Clamping Block Lathe Tool Accuracy 0.005mm
US$21.99 US$39.99
0
Comments (2)
Bgabriel 28/01/2025
Nem kaptam meg!
ENJOYWOOD 3D Multi-Angle Measuring Ruler Square Protractor Hole Positioning Inch/MM Imperial Metric Durable Aluminum Alloy T-Type Triangle Scriber Tool Ideal for Woodworking Measuring Angles 22.5/30/45/60/67.5/90 Degrees
US$0.00
0
Recommendations
Comments (1)
Bgabriel 28/01/2025
1 of the four sockets does not work, it only works if a plug is inserted into the wrong socket. There is a contact problem. To disassemble, you need a thin-handled triangular screwdriver for the screws with a triangular recess at the bottom of the deep holes. The USB outputs work fine, I could not check the safety disconnection against electric shock towards the mains connection, as I could not disassemble it yet.
BlitzWolf BW-EC1 8-in-1 Vertical Cube EU Socket Plug Power Outlet Extender with 4 AC Outlets / 2 USB-A / 2 USB-C for MacBook iPad Game Office Home
US$0.00
0
Recommendations
Comments (1)
Bgabriel 28/01/2025
It arrived on time, it was easy to set up. The colored sheets under the buttons were crumpled. The calculator is not equivalent to the functions of a basic calculator, but this does not significantly impair its usability. There is no need for calculations up to 8 decimal places with such a simple device. When installing the tilted display, you need to pay attention to the placement of the two panels. The key layout is a bit unusual, but you can get used to it.
DIY LCD1062 Electronic Calculator Kit ABS Shell Soldering Training Microcontroller Experiment
US$0.00
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe