All Messages

Q: is it hotswapable

Asked by CaydenNguyen on 2020-08-16 01:07:00

tenen the switch's are both. Can be used in both a hot swappable setup or soldered in

2020-09-09 10:57:20 Helpful (0)
Submit
Answers (1)

Q: Are they rgb and does it come with a key puller

Asked by BG341123921 on 2020-09-09 06:30:04

tenen they have a pass thru for leds and clear top but do not rgb themselves. Yes cheap plastic puller

2020-09-09 10:56:03 Helpful (0)
Submit
Answers (2)

Q: Can you disassemble the kit to modify each part alone?

Asked by BG412175073 on 2020-06-28 10:11:13

tenen yes. mine together but the stabs had already been lubed and clipped

2020-07-16 08:05:05 Helpful (0)
Submit
Answers (1)

Q: Will any 5 pin switches work?

Asked by BG115149433 on 2020-07-15 10:22:33

tenen yes and no. it had the pin holes but they are slightly small. you may bad to sand down the pins a little depending on the molds they came from

2020-07-16 08:04:06 Helpful (0)
Submit
Answers (1)

Q: does it come with they actual key inside?

Asked by inventorJS on 2019-03-04 02:07:49

tenen yes the switch is solder to the battery unable to swap led but switch's can be pulled and swapped

2020-06-11 10:59:57 Helpful (0)
Submit
Answers (1)

Q: can you reprogram the leds?

Asked by BG324811953 on 2020-06-01 09:34:33

tenen there is a software that can be run. you have to search the web for it. usually a quick YouTube or Google will find it

2020-06-11 10:59:11 Helpful (0)
Submit
Answers (1)

Q: Does it come with pre-lubed stabilizers?

Asked by BG515745390 on 2020-06-11 08:33:31

tenen yes both of the gk61 I have received came with pre-lubed stabs. 1 was even clipped as the other still needed to be clipped

2020-06-11 10:58:09 Helpful (1)
Submit
Answers (3)

Q: does it work with the gk61 keyboard?

Asked by BG634810353 on 2020-05-30 05:10:09

tenen yes I originally used these for my gk61

2020-06-03 02:09:19 Helpful (0)
Submit
Answers (1)

Q: Does it work with kailh white box switches

Asked by BG364811952 on 2020-05-26 01:00:30

tenen yes, I'm currently using kailh box Jade

2020-05-26 11:27:18 Helpful (0)
Submit
Answers (1)

Q: Can I take off the stabilizers and put them on a new plate?

Asked by ggyorody on 2020-05-15 05:58:43

tenen yes they are cherry style plate mounted stabs. just clip in and off. I took mine off to lube and trim and put back into place

2020-05-15 06:35:04 Helpful (0)
Submit
Answers (1)

Q: Does this work with gateron optical switches?

Asked by BG111516543 on 2020-05-08 09:56:42

tenen it does not work with any optical switch. Full mechanical only

2020-05-09 10:44:41 Helpful (2)
Submit
Answers (4)

Q: are these optical switches?

Asked by rgabriellekim on 2019-12-26 01:34:10

BG181154212 no they are not

2020-02-22 09:43:35 Helpful (0)
Submit
Answers (6)