mKotek
Q: can accept the drillpro for the wood?
Asked by Alexandros Tzitziras on 2021-04-09 10:49:00
mKotek one can connect cameras via regular network as well
2020-10-31 04:38:32 Helpful (0)
mKotek can you put the camera on the side and rotate image 90 degrees in the configuration?
kilroy22 I would dig further with ONVIF, since I'm pretty sure that these cameras support ONVIF. Installed many of them, on cam+Hiseeu NVR, cam+ QNAP NAS, cam+NVR sw on PC.. everything works.. I've seen that on QNAP NAS there is ONVIF, but under ONVIF there where 7-8 types of ONVIF "detection". I had to find the right sub-ONVIF detection. It did not work firstly without trying harder. Hope this helps someone. ONVIF works 101% for me...
2020-01-25 10:26:49 Helpful (0)
komnino0 rtsp://IP_ADDRESS/stream1 worked for me from VLC
2019-10-16 11:30:27 Helpful (1)Q: The button controls only the USB ports?
Asked by Kookie_Monster on 2019-05-22 05:44:59
mkotnowski if you flash tasmota using tuya-convert, you will have control for both independently
2019-10-03 10:30:19 Helpful (2)
mkotnowski Have you managed to determine, how to get single images or MJPEGs from the camera?
mkotnowski Yes, it does. I am using it with Hiseeu NVR providing POE.
2019-09-15 02:50:49 Helpful (0)Q: Can the firmware be upgraded to support Polish language?
Asked by mkotnowski on 2019-05-23 12:06:32We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
mKotek You need to take into account, the shaft is rectangular, not regular drill shank. As a result, you need special drills, this is basically meant as a driver not a drill, although with right tool you will be able to drill a hole in wood as well.
2021-04-09 12:10:40 Helpful (0)