All Messages

MrThakur Disassemble first layer of back cover including top cover. On the top of the video door bell, there are micro USB and SD card slots.

2020-11-05 03:04:04 Helpful (1)
Submit
Answers (5)

MrThakur Four mechanical OF-OFF switches (relays) controlled by a digital electronic circuit:Well, simply its a WIFI Controlled (four channel) Smart Switches [(relays), (i.e. Four ON-OFF switches)] and applicable up to 250V, 10A electricity respectively (replacing four manual switches), whose Cutover voltage 250V and or Cutover current 10A respective to the switches.However, the above smart switch is controlled by a digital circuit whose working voltage USB 5V or DC 5V, said digital circuit (irrelevant to an user) that makes said four channel Switches ON or OFF respectively, as per setup of the program in the app.) Therefore, any digital input (in the circuit board) is not relevant to an user of the Smart Switch and Key1, Key2 etc. is matter of the digital circuitry (irrelevant to an user like you) that controls the Smart Switches (relevant to an user like you.)

2020-10-27 01:50:30 Helpful (1)
Submit
Answers (1)

MrThakur It is not Power Horizontal rather Output Horizontal, meaning there is zero lift of output water, When the input water level is same as out put water lift i.e. horizontal level between input and output water level with the motor.

2020-06-30 09:43:13 Helpful (0)
Submit
Answers (2)

Waddleeeenn they seems do not sell the E17 lamp base.

2020-06-17 02:02:11 Helpful (0)
Submit
Answers (1)

MrThakur Hello,Go to the product page and find Check The Supporting Device Manual link at the bottom of its specification, alternatively you may download the page form the following link to confirm if the desired sensor is supported by this device, go to the link http://myosuploads3.banggood.com/products/20200107/20200107002454SupportDevice.docx

2020-06-10 06:10:47 Helpful (1)
Submit
Answers (1)

Q: What is the frequency range of this UV ray?

Asked by MrThakur on 2020-06-08 03:33:45

Bubul about 50/60Hz.

2020-06-10 04:34:46 Helpful (0)
Submit
Answers (1)

Q: does Netflix work well

Asked by BG521854124 on 2020-05-16 07:44:34

MrThakur Netflix can be installed and work only if you have subscription with netflix. Plese confirm quality of Netflix with others.

2020-05-28 01:19:45 Helpful (0)
Submit
Answers (1)

Q: can the camera work without an Internet connection, but only over a local network?

Asked by Павел Демещенко on 2020-05-20 07:53:21

MrThakur Yes it will work on a local wireless network (LAN or WLAN) through WiFi router without incurring internet charge. But one needs to use internet connected WiFi router or LAN at least for once for the first time to update device software, However, it is necessary to use a microSD card in the camera so that it can record the video it captures. Certainly up to 32GB - may be above GB that I cannot remember now, please confirm.

2020-05-28 01:17:13 Helpful (0)
Submit
Answers (1)

Q: does it still work on 4G network

Asked by stunkie on 2020-05-20 04:22:37

MrThakur It does work on 4G network or any internet connection through a router to connect the device with WiFi. You cannot use a SIM inside it but there is RJ45 port to connect it with LAN or probably with cable internet.

2020-05-28 01:10:33 Helpful (0)
Submit
Answers (1)

Q: introduction????

Asked by carlosjose on 2020-05-27 07:11:53

MrThakur Product description described it as a wireless (RF) remote (Transmitter). It means the switch acts as a RF remote control to turn on or off Sonoff switch connected with any application like bulb, fan, or whatever upto the applicable power limit.

2020-05-28 01:00:38 Helpful (0)
Submit
Answers (1)

Q: Does it have clpud

Asked by Sérgio Afonso on 2020-01-09 06:34:36

MrThakur It does have paid clouds account only.

2020-04-21 10:26:16 Helpful (0)
Submit
Answers (2)

MrThakur The fundamental principle is you have to paid this remote with a compatible device or switch or whatever. Generally the other device which needs to be paired with this remote will have reset or pairing switch pressing which that device would opens itself for pairing for certain period of time within which you press a specific button of the remote you desire to be the button to operate that device, the device then remember corresponding signal of that switch and closes it's pairing option. Once successfully paired, next you press that button of the remote, paired device responses or acts.

2020-04-21 10:25:36 Helpful (1)
Submit
Answers (3)

ivo1brno I bought M.2 SSD WD Blue 3D, disable eMMC (speed 150-100) insade, reinstal Win 10 PRO on WD and I have now PC Rocket :) (speed 500-500). Unfortunately, the Celeron N3060 is the weakest link - but for the price - what you want !!! Enjoy :)

2020-04-11 03:29:22 Helpful (0)
Submit
Answers (3)

MrThakur search "Advanced Settings" in Control Panel and select the Advanced Tab - Performance Section, Settings Button and click the "Adjust for best Performance" radio button, which will remove more load off the CPU and RAM.

Martin 2020-03-27 04:41:42
6
Comments (1)

MrThakur search "Advanced Settings" in Control Panel and select the Advanced Tab - Performance Section, Settings Button and click the "Adjust for best Performance" radio button, which will remove more load off the CPU and RAM.

MrThakur 2020-01-15 14:48:06
5
Comments (1)

Q: Does it come rooted? If yes can it get unrooted?

Asked by BG425038735 on 2020-04-07 03:30:34

MrThakur The device appears to be jailbroken (unrooted) as such many apps does not allow them to be installed.

2020-04-07 04:02:28 Helpful (2)
Submit
Answers (5)